Cisco Systems 30X manual Installing Your Cisco SPA 301 IP Phone, Connecting the Handset

Installing Your Phone	2
Installing Your Cisco SPA 301 IP Phone

Installing Your Cisco SPA 301 IP Phone

Figure 1 Cisco SPA 301 Phone Power and Handset Connections

Connecting the Handset

STEP 1 Turn the phone body over to expose the ports on the back of the unit.

STEP 2 Insert the long end of the phone cord into the handset port on the phone body that is marked with a phone symbol. (labeled 2 in Figure 1).

STEP 3 Insert the other end of the phone cord into the port at the bottom of the handset (not shown).

Connecting the Power

Insert one end of the power cord into an outlet and insert the other end of the power cord into the power port on the phone body (labeled 1 in Figure 1).

NOTE To power the phone through the Ethernet connection, use the optional Cisco POES5 5-Volt Power Over Ethernet Splitter accessory. See the Cisco POES5 documentation on Cisco.com for more information.

Cisco Small Business IP Phone SPA 30X User Guide (SPCP) 14