Using Advanced Phone Features | 4 |
| |
Monitoring/Accessing Another Phone from Your Phone (Cisco SPA 303) |
|
|
|
|
|
Monitoring/Accessing Another Phone from Your Phone (Cisco SPA 303)
Your phone administrator may configure your phone so that you can monitor other user’s phones from your phone. If this feature is configured, some line buttons on your phone are assigned to display the status of another user’s phone. For example, if your line 3 is configured to display Bob’s phone line, the LED on your phone will glow red when his monitored line is ringing.
In addition, if your phone administrator has configured it, you can press the same line button (3) to speed dial Bob’s extension, or to pick up a ringing call at his extension.
Customizing Your LCD Screen (Cisco SPA 303)
You can customize your LCD screen in several ways.
Changing the LCD Screen Contrast
To adjust the contrast of the LCD screen:
STEP 1 Press the Setup button.
STEP 2 Scroll to Settings and press Select.
STEP 3 Scroll to Contrast and press the Select softkey.
STEP 4 Use the navigation button to adjust the LCD screen contrast:
•To decrease the contrast: Press the Left navigation button or Down softkey.
•To increase the contrast: Press the Right navigation button or Up softkey.
STEP 5 Press the OK softkey.
Configuring the Phone Screen Saver
You can enable your phone’s screen saver and specify its appearance and the amount of time for the phone to be idle before it begins.
Cisco Small Business IP Phone SPA 30X User Guide (SPCP) | 44 |