BT 106 manual Call barring, Creating a hotline number, Example Extension 12 barring is level

Page 16

Ultimate 106 – Edition 1 – Issue 3 - 18.12.02 – 5129

Call barring

You can stop calls, such as international or premium rate, being made from an extension.

To set call barring

Press keypad buttons in order shown

In program mode.

4Enter this code to start call barring.

Ext Enter the extension number you want to bar calls from (1 = 11, 2 = 12 etc.)

#To confirm.

Now choose the type of barring:

0No restrictions; all calls allowed.

1Allows speed dial numbers, 999, 112 and 144, numbers not beginning with 0 or 1.

2Allows speed dial numbers only, 999,

112 and 144.

3Allows 999, 112 and 144 only. Your Ultimate 106 announces, for

example: “Extension 12 barring is level 3”

Replace the handset back on the cradle.

Creating a hotline number

You can designate an extension telephone as a hotline. This means the telephone will automatically dial a pre-set number whenever the receiver is lifted. A hotline number overrides any call-barring restrictions that have been set.

For example, if the Ultimate 106 is installed in a bar, one extension can be set to dial a local taxi service. At home, you may want to provide children with a phone that will automatically call your work number.

To set a hotline number

In program mode.

5Enter code.

Ext Enter extension you want as a hotline (2-6). (Extension 1 cannot be used as a hotline.)

#1 To confirm.

Your Ultimate 106 announces, for

example: “Extension 12 is set for hotline”.

The hotline number that will be dialled must be stored as a speed dial number, location 50, see page 29 of this user guide to store speed dial numbers.

PLEASE NOTE

The following numbers can always be dialled,

whatever level of call barring you set: 999, 112, 144 emergency services and Chargecard calls.

14

Image 16

Contents User Guide UltimateKey features At a glance For your records Personal Emergency NumbersContents Introduction Unpacking your UltimateInstallation Wall mounting the Ultimate Extension numbersInstall the required number Extension sockets To connect up to 6 master extension socketsConnect the extension sockets to the Ultimate Remove the lower cover from the UltimateConnect the power cable Connect the telephone line cordSystem settings To make any system settingsTime and date settings Time is 3.15pmMonday February 27th To set the timeRing delay is 3 rings and day mode Extension ring delay Day and night modesTo set the ring delay To stop extensions from ringing during the day To select which extensions ring during the dayTo select which extensions ring during the night Day mode start 830 a.m Night mode start 6pmCall barring Creating a hotline numberExample Extension 12 barring is level Example Extension 12 is set for hotlineExtension 12 is set for payphone Connecting a payphoneExtension 12 is set for normal Connecting a fax machine Resetting the systemCall Sign on, delay off Call Sign on, delay onAnnounce System reset Playing music to callers on holdTo select answering machine mode Answering MachineCall Director To set-up Answering MachineAnnounces Answering delay is set Answering delay is two ringsAnswering delay is six rings Answering delay is nine ringsTo set up Call Director Announces Call Director is setAnnounces Call Director is on Announces Call Director is offRecord your call director message after the tone To record a Call Director OGMTo replay the Call Director OGM Call Director, example OGMsYour messages Playing back your messagesPush square to confirm To hear how much recording time is remaining To program your PINTo operate your Answering Machine from another telephone Using your phone extensions Making and receiving callsTo put a call on hold To hold a 3-way callTo transfer a call between extensions To forward calls to another extensionAlarm on am Alarm clearedAnnounces Extension divert is off Announces Extension do not disturb is setUsing your Ultimate 106 as a Room Monitor Using RingbackRingback Extension X or Ringback To set the Room MonitorEnter 2 digit location and number Using the speed dial memoryIntercom Ring a telephone number To store the last dialled call as a speed dial number To dial a speed dial numberUsing BT Select Services Using Caller IdentificationTo set the Caller Identification options at each extension To screen incoming calls using Caller IdentificationTo review calling numbers To use BT’s Call Waiting service BT’s Call Waiting serviceTo switch between 2 callers Maintenance ServiceWall mounting To wall mount the Ultimate 106 base unitAre you in the correct programming mode i.e. program/normal HelpTechnical information DtmfUltimate 106 default settings Normal modeGlobal programming mode Index OGM Offices worldwide Ultimate 106 Wall Mounting Template

Related manuals

Manual 42 pages 47.06 Kb