BT 106 Connecting a payphone, Extension 12 is set for payphone, Extension 12 is set for normal

Page 17

Ultimate 106 – Edition 1 – Issue 3 - 18.12.02 – 5129

PLEASE NOTE

The hotline number is dialled immediately after the handset is lifted. You can still answer incoming calls on a hotline extension and you can transfer calls (using the RECALL) button. There is no voicemail from this extension.

To cancel the hotline number

In program mode.

5Enter this code.

Ext Enter the extension number (2-6) you have as a hotline.

#Enter this code.

6To confirm.

Replace the handset back on the cradle.

Connecting a payphone

You can connect a private payphone as one

of your extensions to the Ultimate 106. None of the Ultimate 106’s features are available to a payphone extension, it simply behaves as a standard telephone line. If you hear an engaged tone when the receiver is lifted, it means another extension is using the line. This option is also used. Note that only one extension can be set as a payphone extension.

It is possible to accept incoming calls at a payphone extension and to use normal call transfer functions (using RECALL).

To set a payphone as an extension

In program mode.

5Enter this code.

Ext Enter the extension number you want to set as a payphone (2-6).

#To confirm.

2Enter 2 to set as payphone mode.

Your Ultimate 106 announces, for example:

“Extension 12 is set for payphone”

Replace the handset back on the cradle.

PLEASE NOTE

For a payphone extension:

You do not need to dial 9 to get an outside line.

A voicemail box cannot be assigned to a payphone extension.

To cancel a payphone extension

In program mode.

5Enter this code.

Ext Enter the payphone extension number (2-6).

#

6To confirm.

Your Ultimate 106 announces

“Extension 12 is set for normal”.

Replace the handset back on the cradle.

15

Image 17
Contents Ultimate User GuideKey features At a glance Personal Emergency Numbers For your recordsContents Unpacking your Ultimate IntroductionWall mounting the Ultimate Extension numbers InstallationTo connect up to 6 master extension sockets Install the required number Extension socketsRemove the lower cover from the Ultimate Connect the extension sockets to the UltimateConnect the telephone line cord Connect the power cableTo make any system settings System settingsTime is 3.15pm Time and date settingsMonday February 27th To set the timeTo set the ring delay Extension ring delay Day and night modesRing delay is 3 rings and day mode To select which extensions ring during the night To select which extensions ring during the dayTo stop extensions from ringing during the day Night mode start 6pm Day mode start 830 a.mCreating a hotline number Call barringExample Extension 12 barring is level Example Extension 12 is set for hotlineExtension 12 is set for normal Connecting a payphoneExtension 12 is set for payphone Resetting the system Connecting a fax machineCall Sign on, delay off Call Sign on, delay onPlaying music to callers on hold Announce System resetAnswering Machine To select answering machine modeCall Director To set-up Answering MachineAnswering delay is two rings Announces Answering delay is setAnswering delay is six rings Answering delay is nine ringsAnnounces Call Director is set To set up Call DirectorAnnounces Call Director is on Announces Call Director is offTo record a Call Director OGM Record your call director message after the toneTo replay the Call Director OGM Call Director, example OGMsPush square to confirm Playing back your messagesYour messages To program your PIN To hear how much recording time is remainingTo operate your Answering Machine from another telephone Making and receiving calls Using your phone extensionsTo hold a 3-way call To put a call on holdTo transfer a call between extensions To forward calls to another extensionAlarm cleared Alarm on amAnnounces Extension divert is off Announces Extension do not disturb is setUsing Ringback Using your Ultimate 106 as a Room MonitorRingback Extension X or Ringback To set the Room MonitorIntercom Ring a telephone number Using the speed dial memoryEnter 2 digit location and number To dial a speed dial number To store the last dialled call as a speed dial numberUsing Caller Identification Using BT Select ServicesTo review calling numbers To screen incoming calls using Caller IdentificationTo set the Caller Identification options at each extension To switch between 2 callers BT’s Call Waiting serviceTo use BT’s Call Waiting service Service MaintenanceTo wall mount the Ultimate 106 base unit Wall mountingHelp Are you in the correct programming mode i.e. program/normalDtmf Technical informationNormal mode Ultimate 106 default settingsGlobal programming mode Index OGM Offices worldwide Ultimate 106 Wall Mounting Template
Related manuals
Manual 42 pages 47.06 Kb