BT 106 Announces Answering delay is set, Answering delay is two rings, Press square to confirm

Page 21

Ultimate 106 – Edition 1 – Issue 3 - 18.12.02 – 5129

To set the ring delay for Answer Machine/Call Director

Set Normal/Program switch to

PROGRAM.

From extension 11 only.

6Enter this code.

3# Toll saver (answers after 6 rings if there are no new messages in mailbox 1, after 2 rings if there are new messages in mailbox 1). Your Ultimate 106

announces: “Answering delay is set”.

Or

4# 2 rings. Your Ultimate 106 announces:

“Answering delay is two rings”.

Or

5# 6 rings. Your Ultimate 106 announces:

“Answering delay is six rings”.

Or

6# 9 rings. Your Ultimate 106 announces:

“Answering delay is nine rings”.

To turn answering machine on, from

any extension

When in normal mode.

86# Enter this code, your Ultimate 106

announces “Answering machine is on”.

To record an outgoing message (OGM)

In normal mode.

36# Enter this code, your Ultimate 106

announces “Please record your outgoing message after the tone”.

Example of OGM

“Hello. I’m sorry we can’t take your call at the moment, but if you leave a message we’ll call you back. Please speak after the tone”.

#To stop recording. The Ultimate 106 replays your OGM, and then announces:

“Press square to confirm”.

#To save your OGM or hang-up to abort without saving the message.

To replay your outgoing message

In normal mode.

36# Enter this code, your Ultimate 106

announces “Please record your outgoing message after the tone”.

✱Press while the voice is announcing this message, and your outgoing message will be replayed.

To turn answering machine off, from any extension

When in normal mode.

87# Enter this code, your Ultimate 106

announces “Answering machine is off”.

19

Image 21

Contents Ultimate User GuideKey features At a glance Personal Emergency Numbers For your recordsContents Unpacking your Ultimate IntroductionWall mounting the Ultimate Extension numbers InstallationTo connect up to 6 master extension sockets Install the required number Extension socketsRemove the lower cover from the Ultimate Connect the extension sockets to the UltimateConnect the telephone line cord Connect the power cableTo make any system settings System settingsTime is 3.15pm Time and date settingsMonday February 27th To set the timeExtension ring delay Day and night modes Ring delay is 3 rings and day modeTo set the ring delay To select which extensions ring during the day To stop extensions from ringing during the dayTo select which extensions ring during the night Night mode start 6pm Day mode start 830 a.mCreating a hotline number Call barringExample Extension 12 barring is level Example Extension 12 is set for hotlineConnecting a payphone Extension 12 is set for payphoneExtension 12 is set for normal Resetting the system Connecting a fax machineCall Sign on, delay off Call Sign on, delay onPlaying music to callers on hold Announce System resetAnswering Machine To select answering machine modeCall Director To set-up Answering MachineAnswering delay is two rings Announces Answering delay is setAnswering delay is six rings Answering delay is nine ringsAnnounces Call Director is set To set up Call DirectorAnnounces Call Director is on Announces Call Director is offTo record a Call Director OGM Record your call director message after the toneTo replay the Call Director OGM Call Director, example OGMsPlaying back your messages Your messagesPush square to confirm To program your PIN To hear how much recording time is remainingTo operate your Answering Machine from another telephone Making and receiving calls Using your phone extensionsTo hold a 3-way call To put a call on holdTo transfer a call between extensions To forward calls to another extensionAlarm cleared Alarm on amAnnounces Extension divert is off Announces Extension do not disturb is setUsing Ringback Using your Ultimate 106 as a Room MonitorRingback Extension X or Ringback To set the Room MonitorUsing the speed dial memory Enter 2 digit location and numberIntercom Ring a telephone number To dial a speed dial number To store the last dialled call as a speed dial numberUsing Caller Identification Using BT Select ServicesTo screen incoming calls using Caller Identification To set the Caller Identification options at each extensionTo review calling numbers BT’s Call Waiting service To use BT’s Call Waiting serviceTo switch between 2 callers Service MaintenanceTo wall mount the Ultimate 106 base unit Wall mountingHelp Are you in the correct programming mode i.e. program/normalDtmf Technical informationNormal mode Ultimate 106 default settingsGlobal programming mode Index OGM Offices worldwide Ultimate 106 Wall Mounting Template

Related manuals

Manual 42 pages 47.06 Kb