BT 106 Connect the extension sockets to the Ultimate, Remove the lower cover from the Ultimate

Page 9

Ultimate 106 – Edition 1 – Issue 3 - 18.12.02 – 5129

Only 2 wires are connected to terminals 2 and 5. Leave the 2 wires that are not used coiled up neatly in the back of the socket for future use.

Plastic wire grip

Pull the plastic wire grip tight, trapping the wire.

Finally, fit the front plate onto the backbox with the screws provided.

IMPORTANT

Please note, cable supplied may not match

exactly the colours specified.

Please ensure that the 2 wires used at the extension socket are the same 2 wires used at the Ultimate 106 connectors.

●2 Connect the extension sockets to the Ultimate 106

Remove the lower cover from the Ultimate 106.

					Power
					In Use
					Day/Night Mode
					Messages
			Call Director/Answer Machine
12v/	12v/		Ext 11	Ext12	Ext13 Ext14 Ext15 Ext16
Com N.O. N.C.			Ext 11	Ext12	Ext13 Ext14 Ext15 Ext16
	Doorlock/	Telephone			External Music On Hold Input Normal	Program
	Intercom	Line	EXT 11	EXT 12	EXT 13 EXT 14 EXT 15 EXT 16

Ultimate 106

There are 6 sets of twin screw connectors.

The telephone extension cable contains 4 strands of wire, 2 with broad orange or blue stripes, 2 with narrow orange or blue stripes.

IMPORTANT

If you have connected the 2 blue strands to the socket, you must also connect the blue strands to the twin screw connectors in the Ultimate 106.

Equally, if you have connected the 2 orange

strands to the extension socket, you must connect the 2 orange strands to the twin screw connector.

Strip the insulation cable off at the end in order to expose 5mm of copper wire for the blue or orange strands.

7

Image 9

Contents Ultimate User GuideKey features At a glance Personal Emergency Numbers For your recordsContents Unpacking your Ultimate IntroductionWall mounting the Ultimate Extension numbers InstallationTo connect up to 6 master extension sockets Install the required number Extension socketsRemove the lower cover from the Ultimate Connect the extension sockets to the UltimateConnect the telephone line cord Connect the power cableTo make any system settings System settingsTime is 3.15pm Time and date settingsMonday February 27th To set the timeExtension ring delay Day and night modes Ring delay is 3 rings and day modeTo set the ring delay To select which extensions ring during the day To stop extensions from ringing during the dayTo select which extensions ring during the night Night mode start 6pm Day mode start 830 a.mCreating a hotline number Call barringExample Extension 12 barring is level Example Extension 12 is set for hotlineConnecting a payphone Extension 12 is set for payphoneExtension 12 is set for normal Resetting the system Connecting a fax machineCall Sign on, delay off Call Sign on, delay onPlaying music to callers on hold Announce System resetAnswering Machine To select answering machine modeCall Director To set-up Answering MachineAnswering delay is two rings Announces Answering delay is setAnswering delay is six rings Answering delay is nine ringsAnnounces Call Director is set To set up Call DirectorAnnounces Call Director is on Announces Call Director is offTo record a Call Director OGM Record your call director message after the toneTo replay the Call Director OGM Call Director, example OGMsPlaying back your messages Your messagesPush square to confirm To program your PIN To hear how much recording time is remainingTo operate your Answering Machine from another telephone Making and receiving calls Using your phone extensionsTo hold a 3-way call To put a call on holdTo transfer a call between extensions To forward calls to another extensionAlarm cleared Alarm on amAnnounces Extension divert is off Announces Extension do not disturb is setUsing Ringback Using your Ultimate 106 as a Room MonitorRingback Extension X or Ringback To set the Room MonitorUsing the speed dial memory Enter 2 digit location and numberIntercom Ring a telephone number To dial a speed dial number To store the last dialled call as a speed dial numberUsing Caller Identification Using BT Select ServicesTo screen incoming calls using Caller Identification To set the Caller Identification options at each extensionTo review calling numbers BT’s Call Waiting service To use BT’s Call Waiting serviceTo switch between 2 callers Service MaintenanceTo wall mount the Ultimate 106 base unit Wall mountingHelp Are you in the correct programming mode i.e. program/normalDtmf Technical informationNormal mode Ultimate 106 default settingsGlobal programming mode Index OGM Offices worldwide Ultimate 106 Wall Mounting Template

Related manuals

Manual 42 pages 47.06 Kb