BT 106 Announces Extension divert is off, Announces Extension do not disturb is set, Alarm on am

Page 29

Ultimate 106 – Edition 1 – Issue 3 - 18.12.02 – 5129

To cancel call forwarding

4✱# Enter this code. The Ultimate 106

announces: “Extension divert is off”.

To set “Do not disturb”

If you do not wish to receive any calls on your extension, lift the handset:

40# Enter this code. The Ultimate 106

announces: “Extension do not disturb is set”.

If the extension handset is picked up, the dialtone will be slightly broken to

confirm “Do not disturb is set”.

To cancel “Do not disturb”

4✱# Enter this code. The Ultimate 106

announces: “Extension do not disturb is off”.

To hear a time announcement

If you wish to hear the current time from any extension:

19Enter this code.

To set an alarm call

You can set an extension to ring at a specific time during the next 24 hours:

85# Enter this code.

KEYPAD Enter the hours then the minutes using the 24-hour clock to set the alarm call time. For example, to set 8:30 am, enter 0830.

#To repeat daily.

	Or
✱	To confirm. To sound only once.
.	The voice announces
	“Alarm on. 8:30 am”.
	When the alarm call is due, the extension
	rings for 30 seconds. If answered, the
	voice announces “This is your Alarm
	call. The time is now 8.30 am”. One
	alarm call per extension (within 24 hrs).
	This must be set at the extension to
	which you wish the wake-up call to ring.
To	cancel an alarm call
85##	Enter this code at the appropriate
	extension. The voice announces
	“Alarm cleared”.

27

Image 29

Contents Ultimate User GuideKey features At a glance Personal Emergency Numbers For your recordsContents Unpacking your Ultimate IntroductionWall mounting the Ultimate Extension numbers InstallationTo connect up to 6 master extension sockets Install the required number Extension socketsRemove the lower cover from the Ultimate Connect the extension sockets to the UltimateConnect the telephone line cord Connect the power cableTo make any system settings System settingsTime is 3.15pm Time and date settingsMonday February 27th To set the timeTo set the ring delay Extension ring delay Day and night modesRing delay is 3 rings and day mode To select which extensions ring during the night To select which extensions ring during the dayTo stop extensions from ringing during the day Night mode start 6pm Day mode start 830 a.mCreating a hotline number Call barringExample Extension 12 barring is level Example Extension 12 is set for hotlineExtension 12 is set for normal Connecting a payphoneExtension 12 is set for payphone Resetting the system Connecting a fax machineCall Sign on, delay off Call Sign on, delay onPlaying music to callers on hold Announce System resetAnswering Machine To select answering machine modeCall Director To set-up Answering MachineAnswering delay is two rings Announces Answering delay is setAnswering delay is six rings Answering delay is nine ringsAnnounces Call Director is set To set up Call DirectorAnnounces Call Director is on Announces Call Director is offTo record a Call Director OGM Record your call director message after the toneTo replay the Call Director OGM Call Director, example OGMsPush square to confirm Playing back your messagesYour messages To program your PIN To hear how much recording time is remainingTo operate your Answering Machine from another telephone Making and receiving calls Using your phone extensionsTo hold a 3-way call To put a call on holdTo transfer a call between extensions To forward calls to another extensionAlarm cleared Alarm on amAnnounces Extension divert is off Announces Extension do not disturb is setUsing Ringback Using your Ultimate 106 as a Room MonitorRingback Extension X or Ringback To set the Room MonitorIntercom Ring a telephone number Using the speed dial memoryEnter 2 digit location and number To dial a speed dial number To store the last dialled call as a speed dial numberUsing Caller Identification Using BT Select ServicesTo review calling numbers To screen incoming calls using Caller IdentificationTo set the Caller Identification options at each extension To switch between 2 callers BT’s Call Waiting serviceTo use BT’s Call Waiting service Service MaintenanceTo wall mount the Ultimate 106 base unit Wall mountingHelp Are you in the correct programming mode i.e. program/normalDtmf Technical informationNormal mode Ultimate 106 default settingsGlobal programming mode Index OGM Offices worldwide Ultimate 106 Wall Mounting Template

Related manuals

Manual 42 pages 47.06 Kb