Embedded Voicemail Installation Guide
IP406 V2 Installation
The following sections detail the process for installing and testing embedded voicemail for an IP406 V2 system.
1. Requirements
Hardware
∙IP Office 406 V2 control unit. No voice compression channels are required.
∙Avaya supplied 512MB Memory (Compact Flash) Card.
Configuration
∙PC, connected to the IP Office network, with the following installed from the IP Office Administration CD:
∙IP Office Manager application.
2.Install the Memory Expansion Card
The IP 406 V2 Memory Card is a Type II Compact Flash memory card. Only a card supplied by Avaya can be used for embedded voicemail. Compact Flash cards from other sources cannot be used for embedded voicemail.
1. Switch off the IP office unit before you insert the memory card.
Warning
∙You must always switch off the IP Office before you insert or remove a memory card.
2.Insert the memory card into the C/F TII card slot on the front of the IP406 V2 control unit. Insert the card with the memory card label upwards. As you insert the card, the card eject button adjacent to the slot will come out.
3.Switch on the IP office unit.
3.System Configuration
The system can now be configured for embedded voicemail. See Configuring an IP Office for Embedded Voicemail.
Page 16 | Embedded Voicemail Installation Guide |
| IP Office |