AltiGen comm 600H manual System & Network Requirements, System Requirements

Page 17

C H A P T E R 2

System & Network Requirements

System Requirements

•AltiWare OE 4.5A or higher

Note: A lower version of AltiWare may cause the IP phone to lose several advanced features, resulting in use as a very basic H.323 phone.

•AltiGen OE 4.5A Gatekeeper or higher (to support Plug and Play functionality)

Network Requirements

•Network connection — the IP phone must have TCP/IP connection to the related AltiWare system

Important:Make sure a switch is used, rather than a hub, in the corporate LAN.

•DHCP Server (to get dynamically IP address when necessary)

•TFTP Server (to update the IP phone firmware when necessary)

•GATEKEEPER (for Plug and Play feature)

AltiAdmin/ACM Admin Configuration Requirements

•The Alti-IP 600H requires a virtual extension to be created as an IP extension in AltiAdmin to handle call processing. Refer to the “Setting Up IP Extensions” chapter in the AltiWare OE/ACC System Installation & Administration Manual or ACM System Administration Manual for detailed instructions on how to set up an IP Extension to manage the IP phone.

•The IP Phone settings must be pre-configured in AltiAdmin/ACM Admin before setting up configuration for the Alti-IP 600H.

Alti-IP 600H Manual 7

Image 17

Contents Administration Manual Trademarks Contents Configuring Phone Settings Glossary Index Alti-IP 600H Manual What The Warranty Covers WarrantyEffect of State Law Overview Preface About This ManualRelated Documentation An Overview of the Alti-IP 600H Alti-IP 600H, Top View Lamp Field key, an AltiServ feature code, a speed New in Version Level Hardware ComponentsHeadset port support Call Record Alti-IP 600H Manual System & Network Requirements AltiAdmin/ACM Admin Configuration RequirementsSystem Requirements Network RequirementsPlug and Play Feature AltiGen IP Phone ServiceBasic Mode Normal OperationManual Setup InstallationIP Phone Configuration Window Parameter Description Demand to Extension VM must be enabled in the Personal Configuration screen on the General page, Record onTftp To connect the Alti-IP 600H Configuring the AltiWare IP Settings Plug and Play Setup Before IP Phone is Started Plug and Play SetupPlug and Play Setup After IP Phone is Started Remote Installation Verifying the Phone Startup Process Resolving Errors Upon StartupConfiguring Phone Setting Soft Keys Restoring Default SettingsRebooting the Alti-IP 600H Headset Port Support Dialing an IP Number Directly from the Alti-IP 600HOperation Notes Setting Menu Path Sub Menu Description Configuring Phone SettingsSystem Settings Network Settings Enabling Dhcp Modifying Dhcp SettingsAssigning a Local IP Address Configuring IP SettingsDisabling Dhcp Updating Phone Firmware Assigning a Tftp ServerSystemVersion Info Assigning NAT Configuring NATSetting Ring Tones Press * * 6 Enter Workgroup Status DisplayFWD forwarding Activity DisplayAlti-IP 600H Manual Configuration on Feature Description Configuration NotesPhone Functions Go to AltiGen IP PhoneTo AltiGen IP Phone Extension ConfigurationRecord VM in the Personal CallHeadset LED for Parked Call Line ParkCall Line button Then, go to AltiGen IP Phone Configuration Station SpeedAlti-IP 600H Manual Appendix a SpecificationsClient Server TroubleshootingFirewall Considerations Contact AltiGen Technical Support Problem/Symptom SolutionTroubleshooting LCD Messages Local Menu Configuration MessagesAlti-IP 600H/600PH Running Messages Message DefinitionLCD Messages User Reference IP Phone Boot MessagesUser Reference Configuration BLF Feature Codes Call Management Dual Tone Multi Frequency see Dtmf GlossaryAlti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Index DSL Alti-IP 600H Manual