AltiGen comm 600H manual Configuring Phone Settings, System Settings

Page 33

C H A P T E R 4

Configuring Phone Settings

A set of phone related parameters — system settings and network settings

—can be configured through the IP phone’s setup menu by pressing “* * 7,” then the ENTER button.

/(UP/DOWN keys) selects YES or NO in the LCD display. (FORWARD key) selects menu.

(BACK key) returns to previous menu.

The following tables describe each setting and corresponding the menu path.

Important:Please note that the configuration in AltiAdmin will override the Alti-IP 600H phone’s local configuration after the IP Phone is registered. If the IP Phone’s local configuration is changed while in Basic mode, these changes will be overwritten by AltiAdmin settings. Also, after the IP Phone is successfully registered with AltiServ, the IP Phone will overwrite the AltiWare IP address and network-related settings on the server.

Note: Several of these settings can be configured through AltiAdmin by the System Administrator.

System Settings

Setting	Menu Path {Sub Menu}	Description

Extension	System>Ext Number	Sets the IP phone’s extension
Number	{Set IP Extension	number
	Number}

Extension	System>Ext	Sets the IP phone’s extension
Password	Password {Set IP	password
	Extension Password}

AltiWare	System>AW Server	Sets the AltiWare server’s IP address
Server	{AltiWare IP Address}

Alti-IP 600H Manual 23

Image 33

Contents Administration Manual Trademarks Contents Configuring Phone Settings Glossary Index Alti-IP 600H Manual What The Warranty Covers WarrantyEffect of State Law Overview Preface About This ManualRelated Documentation An Overview of the Alti-IP 600H Alti-IP 600H, Top View Lamp Field key, an AltiServ feature code, a speed New in Version Level Hardware ComponentsHeadset port support Call Record Alti-IP 600H Manual System & Network Requirements AltiAdmin/ACM Admin Configuration RequirementsSystem Requirements Network RequirementsPlug and Play Feature AltiGen IP Phone ServiceBasic Mode Normal OperationManual Setup InstallationIP Phone Configuration Window Parameter Description Demand to Extension VM must be enabled in the Personal Configuration screen on the General page, Record onTftp To connect the Alti-IP 600H Configuring the AltiWare IP Settings Plug and Play Setup Before IP Phone is Started Plug and Play SetupPlug and Play Setup After IP Phone is Started Remote Installation Verifying the Phone Startup Process Resolving Errors Upon StartupRestoring Default Settings Rebooting the Alti-IP 600HConfiguring Phone Setting Soft Keys Headset Port Support Dialing an IP Number Directly from the Alti-IP 600HOperation Notes Configuring Phone Settings System SettingsSetting Menu Path Sub Menu Description Network Settings Enabling Dhcp Modifying Dhcp SettingsConfiguring IP Settings Disabling DhcpAssigning a Local IP Address Updating Phone Firmware Assigning a Tftp ServerSystemVersion Info Configuring NAT Setting Ring TonesAssigning NAT Press * * 6 Enter Workgroup Status DisplayFWD forwarding Activity DisplayAlti-IP 600H Manual Configuration on Feature Description Configuration NotesPhone Functions Go to AltiGen IP PhoneTo AltiGen IP Phone Extension ConfigurationRecord VM in the Personal CallHeadset Park Call Line buttonLED for Parked Call Line Then, go to AltiGen IP Phone Configuration Station SpeedAlti-IP 600H Manual Appendix a SpecificationsTroubleshooting Firewall ConsiderationsClient Server Contact AltiGen Technical Support Problem/Symptom SolutionTroubleshooting LCD Messages Local Menu Configuration MessagesAlti-IP 600H/600PH Running Messages Message DefinitionLCD Messages User Reference IP Phone Boot MessagesUser Reference Configuration BLF Feature Codes Call Management Dual Tone Multi Frequency see Dtmf GlossaryAlti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Index DSL Alti-IP 600H Manual