AltiGen comm 600H manual Headset

Page 45

Flash	Signals PBX that special	• By default, the lower left Soft Key
	instructions will follow.	is set up as FLASH. This can be re-
		assigned in AltiAdmin through the
		AltiGen IP Phone Configuration
		window. Only this key can be
		configured as FLASH.

Headset	When selected, the user	• By default, the lower right Soft key
	will be able to activate a	is set up as Headset. From
	third-party headset	AltiAdmin/ACM Admin, go to
	(certified by AltiGen)	AltiGen IP Phone Configuration
		on the Management Menu, go to
		the desired extension, and set the
		lower right soft key (#10) to
		Headset.

Hold	Places an active call on	• When multiple Call Waiting
	hold.	Feature is enable at the extension,
		the use can put multiple incoming
		calls on hold and retrieve using the
		phone’s / (UP/DOWN keys)
		and ENTER button.
		• Pressing HOLD while onhook will
		retrieve last hold call.
		• Supports up to 9 hold calls.

Intercom	Connects you directly to	• Feature does not require special
(ICOM)	the callee’s intercom after	configuration to work.
(ICOM)	exactly one ring.
	exactly one ring.

Alti-IP 600H Manual 35

Image 45

Contents Administration Manual Trademarks Contents Configuring Phone Settings Glossary Index Alti-IP 600H Manual What The Warranty Covers WarrantyEffect of State Law Overview Preface About This ManualRelated Documentation An Overview of the Alti-IP 600H Alti-IP 600H, Top View Lamp Field key, an AltiServ feature code, a speed New in Version Level Hardware ComponentsHeadset port support Call Record Alti-IP 600H Manual System & Network Requirements AltiAdmin/ACM Admin Configuration RequirementsSystem Requirements Network RequirementsPlug and Play Feature AltiGen IP Phone ServiceBasic Mode Normal OperationManual Setup InstallationIP Phone Configuration Window Parameter Description Demand to Extension VM must be enabled in the Personal Configuration screen on the General page, Record onTftp To connect the Alti-IP 600H Configuring the AltiWare IP Settings Plug and Play Setup Before IP Phone is Started Plug and Play SetupPlug and Play Setup After IP Phone is Started Remote Installation Verifying the Phone Startup Process Resolving Errors Upon StartupRestoring Default Settings Rebooting the Alti-IP 600HConfiguring Phone Setting Soft Keys Headset Port Support Dialing an IP Number Directly from the Alti-IP 600HOperation Notes Configuring Phone Settings System SettingsSetting Menu Path Sub Menu Description Network Settings Enabling Dhcp Modifying Dhcp SettingsConfiguring IP Settings Disabling DhcpAssigning a Local IP Address Updating Phone Firmware Assigning a Tftp ServerSystemVersion Info Configuring NAT Setting Ring TonesAssigning NAT Press * * 6 Enter Workgroup Status DisplayFWD forwarding Activity DisplayAlti-IP 600H Manual Configuration on Feature Description Configuration NotesPhone Functions Go to AltiGen IP PhoneTo AltiGen IP Phone Extension ConfigurationRecord VM in the Personal CallHeadset Park Call Line buttonLED for Parked Call Line Then, go to AltiGen IP Phone Configuration Station SpeedAlti-IP 600H Manual Appendix a SpecificationsTroubleshooting Firewall ConsiderationsClient Server Contact AltiGen Technical Support Problem/Symptom SolutionTroubleshooting LCD Messages Local Menu Configuration MessagesAlti-IP 600H/600PH Running Messages Message DefinitionLCD Messages User Reference IP Phone Boot MessagesUser Reference Configuration BLF Feature Codes Call Management Dual Tone Multi Frequency see Dtmf GlossaryAlti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Index DSL Alti-IP 600H Manual