AltiGen comm manual Dialing an IP Number Directly from the Alti-IP 600H, Headset Port Support

Page 31

1.Press * * 6, then the ENTER button.

2.Scroll to the program key to configure.

3.Enter the appropriate digits for the speed dial number or feature code. The digits will be automatically dialed when this function key is pressed.

Dialing an IP Number Directly from the Alti-IP 600H

To dial an IP number directly from the Alti-IP 600H phone set, enter the IP address using the * key to enter periods followed by the # key.

Notes:

•This only works when the Alti-IP 600H is operating in basic mode.

•If the Alti-IP 600H is configured for a public IP address, you can call other public IP address devices.

If the Alti-IP 600H is configured for a private IP address, you can call other private IP address devices that you can “see” or that are on your subnet.

Headset Port Support

Important:Contact AltiGen for the most current list of certified headsets.

A headset port is added to the back of the phone chassis. When enabled by the administrator, the IP phone user will be able to activate a third-party headset. The pin outlet for headset support is specified below:

Pin 1 (Tx-), Pin 2 (Rx1), Pin 3 (Rx2), Pin 4 (Tx+)

The port has a separate volume control and voice stream switching among speaker, handset, and headset. The 10th programmable key is assigned as the headset offhook/onhook switch through the IP Phone Configuration page in AltiWare Administrator.

To use the headset, the user can go offhook or onhook by pressing the headset button.

Note: For the Alti-IP 600H, if using Plantronics H91N or H101N headsets, in order to plug in these headsets to the headset port, a separate Plantronics cable should be used (and must be ordered separately: part # 27190-01).

Alti-IP 600H Manual 21

Image 31

Contents Administration Manual Trademarks Contents Configuring Phone Settings Glossary Index Alti-IP 600H Manual What The Warranty Covers WarrantyEffect of State Law Overview Preface About This ManualRelated Documentation An Overview of the Alti-IP 600H Alti-IP 600H, Top View Lamp Field key, an AltiServ feature code, a speed New in Version Level Hardware ComponentsHeadset port support Call Record Alti-IP 600H Manual Network Requirements AltiAdmin/ACM Admin Configuration RequirementsSystem & Network Requirements System RequirementsNormal Operation AltiGen IP Phone ServicePlug and Play Feature Basic ModeManual Setup InstallationIP Phone Configuration Window Parameter Description Demand to Extension VM must be enabled in the Personal Configuration screen on the General page, Record onTftp To connect the Alti-IP 600H Configuring the AltiWare IP Settings Plug and Play Setup Before IP Phone is Started Plug and Play SetupPlug and Play Setup After IP Phone is Started Remote Installation Verifying the Phone Startup Process Resolving Errors Upon StartupRebooting the Alti-IP 600H Restoring Default SettingsConfiguring Phone Setting Soft Keys Headset Port Support Dialing an IP Number Directly from the Alti-IP 600HOperation Notes System Settings Configuring Phone SettingsSetting Menu Path Sub Menu Description Network Settings Enabling Dhcp Modifying Dhcp SettingsDisabling Dhcp Configuring IP SettingsAssigning a Local IP Address Updating Phone Firmware Assigning a Tftp ServerSystemVersion Info Setting Ring Tones Configuring NATAssigning NAT Press * * 6 Enter Workgroup Status DisplayFWD forwarding Activity DisplayAlti-IP 600H Manual Go to AltiGen IP Phone Feature Description Configuration NotesConfiguration on Phone FunctionsVM in the Personal Call Extension ConfigurationTo AltiGen IP Phone RecordHeadset Call Line button ParkLED for Parked Call Line Then, go to AltiGen IP Phone Configuration Station SpeedAlti-IP 600H Manual Appendix a SpecificationsFirewall Considerations TroubleshootingClient Server Contact AltiGen Technical Support Problem/Symptom SolutionTroubleshooting Message Definition Local Menu Configuration MessagesLCD Messages Alti-IP 600H/600PH Running MessagesLCD Messages User Reference IP Phone Boot MessagesUser Reference Configuration BLF Feature Codes Call Management Dual Tone Multi Frequency see Dtmf GlossaryAlti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Index DSL Alti-IP 600H Manual