AltiGen comm 600H manual Operation Notes

Page 32

Operation Notes

•When using #26 and #27 to log out/in, the Alti-IP 600H must be onhook. Using the speaker button to use #26 or #27 will not work.

•Two dial tones are always heard when going offhook on the Alti-IP 600H.

•If two calls ring into the Alti-IP 600H at the same time and the user attempts to answer the second call, the IP phone will automatically connect the user to the first call.

•The user should reboot the Alti-IP 600H after disconnecting the LAN cable to the phone.

•The user should reboot the Alti-IP 600H after changing the IP address or DHCP setting.

•If the Alti-IP 600H is configured for a public IP address, you can call other public IP address devices.

•If the Alti-IP 600H is configured for a private IP address, you can call other private IP address devices that you can “see” or that are on your subnet.

•The daisy chaining of Alti-IP 600H phones is not supported.

Alti-IP 600H Manual 22

Image 32

Contents Administration Manual Trademarks Contents Configuring Phone Settings Glossary Index Alti-IP 600H Manual Warranty What The Warranty CoversEffect of State Law Preface About This Manual OverviewRelated Documentation An Overview of the Alti-IP 600H Alti-IP 600H, Top View Lamp Field key, an AltiServ feature code, a speed Hardware Components New in Version LevelHeadset port support Call Record Alti-IP 600H Manual AltiAdmin/ACM Admin Configuration Requirements System & Network RequirementsSystem Requirements Network RequirementsAltiGen IP Phone Service Plug and Play FeatureBasic Mode Normal OperationInstallation Manual SetupIP Phone Configuration Window Parameter Description Configuration screen on the General page, Record on Demand to Extension VM must be enabled in the PersonalTftp To connect the Alti-IP 600H Configuring the AltiWare IP Settings Plug and Play Setup Plug and Play Setup Before IP Phone is StartedPlug and Play Setup After IP Phone is Started Remote Installation Resolving Errors Upon Startup Verifying the Phone Startup ProcessConfiguring Phone Setting Soft Keys Restoring Default SettingsRebooting the Alti-IP 600H Dialing an IP Number Directly from the Alti-IP 600H Headset Port SupportOperation Notes Setting Menu Path Sub Menu Description Configuring Phone SettingsSystem Settings Network Settings Modifying Dhcp Settings Enabling DhcpAssigning a Local IP Address Configuring IP SettingsDisabling Dhcp Assigning a Tftp Server Updating Phone FirmwareSystemVersion Info Assigning NAT Configuring NATSetting Ring Tones Workgroup Status Display Press * * 6 EnterActivity Display FWD forwardingAlti-IP 600H Manual Feature Description Configuration Notes Configuration onPhone Functions Go to AltiGen IP PhoneExtension Configuration To AltiGen IP PhoneRecord VM in the Personal CallHeadset LED for Parked Call Line ParkCall Line button Configuration Station Speed Then, go to AltiGen IP PhoneAlti-IP 600H Manual Specifications Appendix aClient Server TroubleshootingFirewall Considerations Problem/Symptom Solution Contact AltiGen Technical SupportTroubleshooting Local Menu Configuration Messages LCD MessagesAlti-IP 600H/600PH Running Messages Message DefinitionLCD Messages IP Phone Boot Messages User ReferenceUser Reference Configuration BLF Feature Codes Call Management Glossary Dual Tone Multi Frequency see DtmfAlti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Index DSL Alti-IP 600H Manual