AltiGen comm 600H manual SystemVersion Info

Page 38

To update the phone firmware directly from the Alti-IP 600H Phone:

1.Press * * 7, then press the ENTER button to access the Configuration Menu.

2. Use / to scroll to System >TFTP Server.

3.Enter TFTP server address.

4.The Alti-IP 600H will download the firmware from the TFTP on the next reboot.

5.Once the IP Phone is rebooted, all LED lights will be on.

6.The LCD screen displays [ATGN BOOT] on the first line.

7.On the second line of the LCD screen, the following messages are displayed in succession:

—CHECK MEMORY (RAM checking state)

—CHECK FW (Firmware checking state)

—BOOTING NOW (Initialization of hardware - LCD, network, DSP, etc.)

—INITIALIZING

—update APP(S1-S5)

8.You may verify the new version of firmware in the phone’s configuration menu (* * 7 ENTER, then scroll to

System>Version Info).

Resolving Errors Upon Startup

If an error occurs during rebooting, the LED light of Soft Keys 1 through 4 will remain on to indicate an error status. These errors represent hardware failures within the Alti-IP 600H.

•LED 1 light on = memory check failed

•LED 2 light on = network failed

•LED 3 light on = DHCP failed

•LED 4 light on = attached IP address failed

If the phone successfully passes through these stages, it has started up properly. Otherwise, refer to “Troubleshooting” on page 40.

Alti-IP 600H Manual 28

Image 38

Contents Administration Manual Trademarks Contents Configuring Phone Settings Glossary Index Alti-IP 600H Manual Warranty What The Warranty CoversEffect of State Law Preface About This Manual OverviewRelated Documentation An Overview of the Alti-IP 600H Alti-IP 600H, Top View Lamp Field key, an AltiServ feature code, a speed Hardware Components New in Version LevelHeadset port support Call Record Alti-IP 600H Manual System Requirements AltiAdmin/ACM Admin Configuration RequirementsSystem & Network Requirements Network RequirementsBasic Mode AltiGen IP Phone ServicePlug and Play Feature Normal OperationInstallation Manual SetupIP Phone Configuration Window Parameter Description Configuration screen on the General page, Record on Demand to Extension VM must be enabled in the PersonalTftp To connect the Alti-IP 600H Configuring the AltiWare IP Settings Plug and Play Setup Plug and Play Setup Before IP Phone is StartedPlug and Play Setup After IP Phone is Started Remote Installation Resolving Errors Upon Startup Verifying the Phone Startup ProcessConfiguring Phone Setting Soft Keys Restoring Default SettingsRebooting the Alti-IP 600H Dialing an IP Number Directly from the Alti-IP 600H Headset Port SupportOperation Notes Setting Menu Path Sub Menu Description Configuring Phone SettingsSystem Settings Network Settings Modifying Dhcp Settings Enabling DhcpAssigning a Local IP Address Configuring IP SettingsDisabling Dhcp Assigning a Tftp Server Updating Phone FirmwareSystemVersion Info Assigning NAT Configuring NATSetting Ring Tones Workgroup Status Display Press * * 6 EnterActivity Display FWD forwardingAlti-IP 600H Manual Phone Functions Feature Description Configuration NotesConfiguration on Go to AltiGen IP PhoneRecord Extension ConfigurationTo AltiGen IP Phone VM in the Personal CallHeadset LED for Parked Call Line ParkCall Line button Configuration Station Speed Then, go to AltiGen IP PhoneAlti-IP 600H Manual Specifications Appendix aClient Server TroubleshootingFirewall Considerations Problem/Symptom Solution Contact AltiGen Technical SupportTroubleshooting Alti-IP 600H/600PH Running Messages Local Menu Configuration MessagesLCD Messages Message DefinitionLCD Messages IP Phone Boot Messages User ReferenceUser Reference Configuration BLF Feature Codes Call Management Glossary Dual Tone Multi Frequency see DtmfAlti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Index DSL Alti-IP 600H Manual