AltiGen comm 600H manual Plug and Play Setup Before IP Phone is Started

Page 26

Plug and Play Setup

The steps for plug and play setup will vary depending on whether or not the Alti-IP 600H Phone has been started. When the Alti-IP 600H is started for the first time, it can support plug and play to enable the phone to automatically register itself to AltiServ. If the Alti-IP 600H has already been started, follow the instructions “Plug and Play Setup After IP Phone is Started” on page 17.

Important Notes:

•To use the Plug and Play feature, the user’s IP Phone must be on the local LAN with AltiServ

•There can only be one (1) AltiServ on the LAN.

•Gatekeeper auto discovery uses broadcast UDP packets which work in the LAN or VPN environment, but not through the public IP network.

Plug and Play Setup Before IP Phone is Started

To set up your IP Phone to properly execute the Plug and Play feature, perform the following steps BEFORE YOU START THE PHONE:

1.Ensure the AltiGen GateKeeper is running and configured to point to the AltiWare system.

2.Ensure DHCP server is up and running.

3.Ensure that there are enough IP addresses.

4.Ensure that there is an available virtual extension with the IP extension feature enabled and dynamic IP address is selected.

5.Power up the IP Phone.

6.Enter the extension number and password.

7.The phone will attempt to register as shown in the LCD screen.

Alti-IP 600H Manual 16

Image 26

Contents Administration Manual Trademarks Contents Configuring Phone Settings Glossary Index Alti-IP 600H Manual Warranty What The Warranty CoversEffect of State Law Preface About This Manual OverviewRelated Documentation An Overview of the Alti-IP 600H Alti-IP 600H, Top View Lamp Field key, an AltiServ feature code, a speed Hardware Components New in Version LevelHeadset port support Call Record Alti-IP 600H Manual System Requirements AltiAdmin/ACM Admin Configuration RequirementsSystem & Network Requirements Network RequirementsBasic Mode AltiGen IP Phone ServicePlug and Play Feature Normal OperationInstallation Manual SetupIP Phone Configuration Window Parameter Description Configuration screen on the General page, Record on Demand to Extension VM must be enabled in the PersonalTftp To connect the Alti-IP 600H Configuring the AltiWare IP Settings Plug and Play Setup Plug and Play Setup Before IP Phone is StartedPlug and Play Setup After IP Phone is Started Remote Installation Resolving Errors Upon Startup Verifying the Phone Startup ProcessConfiguring Phone Setting Soft Keys Restoring Default SettingsRebooting the Alti-IP 600H Dialing an IP Number Directly from the Alti-IP 600H Headset Port SupportOperation Notes Setting Menu Path Sub Menu Description Configuring Phone SettingsSystem Settings Network Settings Modifying Dhcp Settings Enabling DhcpAssigning a Local IP Address Configuring IP SettingsDisabling Dhcp Assigning a Tftp Server Updating Phone FirmwareSystemVersion Info Assigning NAT Configuring NATSetting Ring Tones Workgroup Status Display Press * * 6 EnterActivity Display FWD forwardingAlti-IP 600H Manual Phone Functions Feature Description Configuration NotesConfiguration on Go to AltiGen IP PhoneRecord Extension ConfigurationTo AltiGen IP Phone VM in the Personal CallHeadset LED for Parked Call Line ParkCall Line button Configuration Station Speed Then, go to AltiGen IP PhoneAlti-IP 600H Manual Specifications Appendix aClient Server TroubleshootingFirewall Considerations Problem/Symptom Solution Contact AltiGen Technical SupportTroubleshooting Alti-IP 600H/600PH Running Messages Local Menu Configuration MessagesLCD Messages Message DefinitionLCD Messages IP Phone Boot Messages User ReferenceUser Reference Configuration BLF Feature Codes Call Management Glossary Dual Tone Multi Frequency see DtmfAlti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Index DSL Alti-IP 600H Manual