Lincoln Electric IM916 manual K435 Coil Adapter, K363P READI-REEL Adapter, K438 READI-REEL Adapter

Page 46

C-3

ACCESSORIES

C-3

 

 

 

K435 - COIL ADAPTER

Permits 14 lb. (6 kg) Innershield coils to be mounted on 2” (51 mm) O.D. spindles.

K363P - READI-REEL ADAPTER

Adapts Lincoln Readi-Reel coils of electrode 30 lb. (14 kg) and 22 lb. (10 kg) to a 2” (51 mm) spindle. Durable molded plastic one piece construction. Designed for easy loading; adapter remains on spin- dle for quick changeover.

K438 - READI-REEL ADAPTER

Adapts Lincoln Readi-Reel coils of electrode 50-60 lb. (22.7-27.2 kg) to a 2” (51 mm) spindle

GUNS AND GUN ADAPTERS

The Power Feed 10 Dual wire feeder is equipped with a factory installed K1500-2 gun connection Kit. This kit is for guns having a Tweco™ #2-#4 connector. The Power Feed 10 Dual has been designed to make con- necting a variety of guns easy and inexpensive with the K1500 series of gun connection kits. Gun trigger and dual procedure lead connections connect to the single 5 pin receptacle on the front of the wire drive box.

MAGNUM 200/300/400 GUNS

The easiest and least expensive way to use Magnum 200/300/400 guns with the Power Feed 10 Dual wire feeder is to order them with the K466-10 connector kit, or to buy a completely assembled Magnum gun hav- ing the K466-10 connector (such as the K471-21, -22, and -23 dedicated Magnum 400 guns and the K497- 20 and -21 dedicated Magnum 200 guns).

MAGNUM 550 GUNS

The easiest and least expensive way to use the Magnum 550 guns with Power Feed 10 Dual wire feeders is to order the gun with the K613-2 connector kit, and install a K1500-3 gun connection kit to the wire feeder.

LINCOLN INNERSHIELD AND SUb ARC GUNS

All of these guns can be connected to the Power Feed by using the K1500-1 Adapter Kit.

LINCOLN FUME ExTRACTION GUNS

The K556 (250XA) and K566 (400XA) guns require that a K489-9 Fast-Mate™ adapter kit be installed.

The K206, K289, and K309 require only the installa- tion of a K1500-1 connector in the Power Feed wire feeder.

NON-LINCOLN GUNS

Most competitive guns can be connected to the Power Feed by using one of the K1500 series adapter kits.

GUN RECEIVER bUSHINGS AND ADAPTERS

K489-9 (DUAL SCHEDULE FAST-MATE ADAPTER)

This adapter installs directly into the wire drive feed- plate, to provide for use of guns with Fast-Mate or European style gun connections. This K489-9 will handle both standard Fast-Mate and Dual Schedule Fast-Mate guns.

K1500-1 (LINCOLN INNERSHIELD GUN STANDARD CONNECTION)

Use this kit to connect the following guns: Guns hav- ing a Lincoln standard innershield gun connector, Magnum 200/300/400 with K466-1 connector kit, and Magnum 550 guns with the K613-1 gun connection kit.

K1500-2 (TWECO #2-#4 TYPE CONNEC- TION)

The K1500-2 gun adapter comes factory installed on the Power Feed 10 Dual wire feeder. Use this adapter for guns that have a Tweco #2-#4 connector. Such guns include Magnum 200/300/400 guns with K466-2 connector kit, and completely factory assembled Magnum guns that are factory equipped with the K466-2 connector (such as the K471-21, -22, and -23 dedicated Magnum 400 guns and the K497-20 and - 21 Magnum 200 guns).

K1500-3 (TWECO #5 CONNECTION)

For Magnum 550 gun with K613-2 Connection Kit, and any other gun having a Tweco #5 connector .

POWER FEED™ 10M DUAL WIRE FEEDER

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Safety Depends on You IM916Safety Electric Shock can kill Welding and Cutting Sparks can Cause fire or explosion IiiPrécautions DE Sûreté Sûreté Pour Soudage a L’ArcPlease Examine Carton and Equipment For Damage Immediately On-Line Product RegistrationTAbLE of Contents Section E ViiSection D Section FWelding Capacity Rating Power Feed 10M Dual Wire FeederAmp Rating Duty Cycle Electrode Routing Safety PrecautionControl CAbLE Specifications Control CAbLE ConnectionsTAbLE A.1 Negative Electrode PolarityElectrode Sense Polarity Minimum CopperVoltage Sensing CAC-CWork Voltage Sensing Wire Drive Gear Ratio High or LOW SpeedSelecting the Proper Gear Ratio Electrode Voltage SensingGear Ratio Recognition Changing the Wire Drive Gear RatioGear Ratio Change Procedure TAbLE A.3With Standard Connection Wire Feed Drive Roll KitsProcedure to Install Drive Rolls and Wire Guides With FAST-MATECONNECTIONGeneral GUN Connection Guidelines Gmaw Shielding GASFlow Sensor Kit installation is as follows Wire Spindle PlacementWire Feed Shut Down Circuit Optional Water Connections for Water Cooled GunsExAMPLES of Connecting AN Arclink Power Wave System Safety Precautions Definitions of Welding ModesRecommended Processes Product DescriptionRecommended Processes and Equipment Recommended EquipmentWire Feed Speed WFS / AMP Meter Operational Features and ControlsPower FEED-10M Series System CONFIGURA- Tion Volt / Trim MeterOutput Controls Mode Select Panel 4 MSP4Dual Procedure / Dual Head Select W/MEMORY Panel OverviewSearching for a Weld Mode POWER-UP SequenceWeld Mode Searching LAYOUT-DIGITAL DisplayAccessing the Machine Setup Menu Limit SettingMachine SETUP/USER Preferences Changing ARC Wave ControlSET-UP Features Menu Parameter DefinitionUser Defined Parameters Parameter Definition Procedure Change Method Stall Factor AdjustmentReset Consumable Weight Parameter Definition Gun Offset AdjustmentCrater Delay TIG Gas ControlDisplay Trim as Volts Option Arc Start/Loss Error TimeParameter Definition Push-Pull Gun Knob behavior Sense From StudsParameter Definition Show Test Modes 100 View Diagnostics107 View Power Source Protocol 102 View Fatal Logs505 Setup Menu Lock 503 Memory button Disable504 Mode Select Panel Lock Parameter Definition 501 Encoder LockoutParameter Definition 506 Set User Interface Passcode Only be accessed using Power Wave Manager software509 UI Master Lockout Figure B.4 Memory Dual Head / Dual Procedure with MemoryDual Procedure / Head Select Saving to MemoryStep / 4 Step Operation Cold FEED/GAS Purge Switch Foot Amptrol Wire Reel Loading READI-REELS, Spools or CoilsHOT Inch Electrode PolarityFigure b.1 Procedure for Setting Angle of Feedplate AdjustmentDrive Roll Pressure Setting GAS Guard Regulator SettingWire Feed Overload Protection Wire Reel ChangingMaking a Weld Component Status Lights Status Light StatesStatus Light States CON’T Low Limit Limit SettingHigh Limit AttributeAluminum Electrode Cored ElectrodeRoll DH Drive 4-Driven K1504-1 Coil Adapter K162-1 Wire Spindle AdapterField Installed OPTIONS/ACCESSORIES Optional Control Panel KitsK438 READI-REEL Adapter K435 Coil AdapterK363P READI-REEL Adapter Guns and GUN AdaptersK590-6 Water Connection KIT Dual Procedure Switch OptionsConduit Adapters K1536-1 Water Flow Sensor KITK1556-1 Light Duty Caster KIT K1733-1 Wire StraightenerK659-1 GAS Guard Regulator K1555-2 Insulated Lift HookRoutine Maintenance MaintenancePeriodic Maintenance TROUbLESHOOTING TROUbLESHOOTING Field Service Facility PRObLEMS POSSIbLE CauseSymptoms Course of Action RecommendedTROUbLESHOOTING Either of these fail, the problem is With switch open and closed. If it Err 004 Err 001Err 003 Err 005Err 200 Err 020Err 100 Err 201Err 212 Err 211Three dashes Error Codes for the Power Wave ErrTROUbLESHOOTING Other Trol boardPower Feed 10M Dual Wire FeederPower Feed Dual Wire FeederL11044 DIAGRAMSF-4 Wire Drive Dimension Print Precaucion Warnung

IM916 specifications

Lincoln Electric IM916 is a state-of-the-art multi-process welding machine designed to meet the needs of professionals in various industries. This versatile welder combines productivity, performance, and durability, making it an ideal choice for both expert welders and apprentices alike.

One of the standout features of the Lincoln Electric IM916 is its multi-process capability. It supports MIG, TIG, and Stick welding, allowing users to switch between processes with ease. This adaptability ensures that users can tackle a diverse range of welding applications, from fabrication and repair work to manufacturing and construction projects.

The IM916 boasts advanced inverter technology, resulting in a compact design that does not compromise on power. Inverter technology allows for efficient energy consumption, providing a more stable arc with improved control and consistency. This feature not only enhances the quality of the welds but also prolongs the life of the machine and reduces operating costs.

Additionally, the machine is equipped with a digital display that offers real-time feedback on weld parameters, making it easier for users to adjust settings on the fly. This helps in achieving precise results and enhancing overall welding performance. The intuitive interface is user-friendly, making it suitable for beginners while still providing the advanced functionalities experienced welders require.

The Lincoln Electric IM916 also features a robust construction designed for longevity in harsh working environments. It is built to withstand the rigors of heavy use, with durable components and protective features that enhance its resilience. This reliability ensures that the machine can perform consistently, even in demanding conditions.

Furthermore, the IM916 is designed with portability in mind. Its lightweight design and integrated handles make it easy to transport between job sites. This mobility is crucial for professionals who require equipment that can keep up with a fast-paced work environment.

In terms of safety, the Lincoln Electric IM916 incorporates several protective features, including thermal overload protection and safety alerts. These mechanisms provide peace of mind to users, allowing them to focus on their work without worrying about equipment failure.

In summary, the Lincoln Electric IM916 is a highly versatile, efficient, and durable welding machine that stands out in its category. With its multi-process capabilities, advanced inverter technology, user-friendly interface, and durable construction, it caters to a wide range of welding tasks, making it a valuable asset for any welding professional.
Top Page Image Contents