7.3Connect the POSITIVE (RED) charger ring terminal to the POSITIVE (POS, P, +) post of the battery.
7.4Position yourself and the free end of the cable you previously attached to the NEGATIVE (NEG, N,
7.5Do not face the battery when making the final connection.
7.6Connect the charger AC supply cord to the electrical outlet.
7.7When disconnecting the charger, always do so in the reverse order of the connecting procedure and break the first connection while as far away from the battery as practical.
7.8A marine (boat) battery must be removed and charged on shore. To charge it onboard requires equipment specially designed for marine use.
8.GROUNDING AND AC POWER CORD CONNECTIONS
RISK OF ELECTRIC SHOCK OR FIRE.
8.1This battery charger is for use on a nominal 120 volt circuit. The plug must be plugged into an outlet that is properly installed in accordance with all local codes and ordinances. The plug pins must fit the receptacle (outlet).
8.2
Never alter the AC cord or plug provided – if it does not fit the outlet, have a proper outlet installed by a qualified electrician. An improper connection can result in a risk of an electric shock or electrocution. NOTE: Pursuant to Canadian Regulations, use of an adapter plug is not allowed in Canada. Use of an adapter plug in the United States is not recommended and should not be used.
8.3Recommended minimum AWG size for extension cord:
•150 feet (45.7 meters) long or less – use an 18 gauge (0.82 mm2) extension cord.
• 8 •