122XL Copper Cutting and Prep Machine
•Use safety equipment. Always wear eye protection. Dust mask,
Tool Use and Care
•Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the same rate for which it is designed.
•Do not use tool if switch does not turn it ON or OFF. Any tool that cannot be controlled with the switch is dangerous and must be repaired.
•Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety mea- sures reduce the risk of starting the tool accidentally.
•Store idle tools out of the reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.
•Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control.
•Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool's operation. If damaged, have the tool serviced before using. Many acci- dents are caused by poorly maintained tools.
•Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.
•Keep handles dry and clean; free from oil and grease. Allows for better control of the tool.
Service
•Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified repair personnel could result in injury.
•When servicing a tool, use only identical replace- ment parts. Follow instructions in the Maintenance Section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electrical shock or injury.
Specific Safety Information
WARNING
Read this operator’s manual carefully before using the 122XL Copper Cutting and Prep Machine. Failure to understand and follow the contents of this man-
ual may result in electrical shock, fire and/or serious personal injury.
Call the Ridge Tool Company, Technical Service Depart- ment at (800)
Machine Safety
•Only use the No. 122XL Cutting and Prep Machine to cut, clean and debur 1/2″ through 4″ copper or stainless tubing. Other uses or modifying this machine for other applications may increase the risk of injury.
•Do not wear gloves or loose clothing. Keep sleeves and jackets buttoned. Clothing can be caught in rotating rollers or tools.
•Never operate machine if guard is damaged. Hand or fingers could be cut by rotating reamer.
•Keep electrical cord away from reamer and wire brushes. Prevents damage to the cord which can result in electrical shock and serious injury.
•Set up machine on the Model 1206 Stand or a flat, level bench. Failure to place machine on a stable stand or bench may result in tipping and serious injury.
•Keep fingers and hands away from the reamer and wire brushes. Reduces the risk of entanglement or being cut.
•Properly support long lengths of tubing with pipe supports. Prevents injury from falling tubing and equipment
•Do not reach inside the tubing. Keep hands away from ends of the tubing. Prevents being cut on burrs or sharp edges.
•Do not cut visibly bent tubing or tubing with fit- tings attached. Prevents excessive vibration and los- ing control of the tubing.
•Do not use with motor cover removed. Exposure to electrical components can result in electrical shock and serious injury.
Description, Specifications and Standard Equipment
Description
The RIDGID Model 122XL Copper Cutting and Prep Machine cuts, cleans and deburs 1/2″ through 4″ copper tubing and fittings (Types K, L and M). Cutting is per- formed by turning the tubing with
Ridge Tool Company | 3 |