3M™ Rapid Detection Reader | Unpacking and Setup |
Item
Barcode Scanner
Catalog # 3967
Description
3M Rapid Detection Reader Setup
The 3M Rapid Detection Reader is comprised of:
§3M RAPID DETECTION Control Module (CM)
User interface and connectors for all peripherals. Stores and displays test results (view, print, transfer, search, filter/sort)
§3M RAPID DETECTION Test Module (TM)
1 – 3 TMs per CM
Each TM has two test cartridge ports for performing simultaneous 3M RAPID DETECTION Tests
§3M RAPID DETECTION Reader Configuration Utility Software (RCU) CD allows customized settings for the 3M Rapid Detection Reader
§Power supply and interconnect cable
§USB flash drive
To set-up 3M Rapid Detection Reader:
1.Place the 3M Rapid Detection Reader components on a stable work surface within reach of an electrical outlet. Access to the back of each module is required to connect components.
2.Remove dust protection stickers from TM ports
3.Connect the TM and any optional devices to the CM using the supplied interconnect cable(s). Refer to Figure 1 for connector locations.
Refer to manufacturer’s instructions for optional printer or barcode scanner for additional information on
4.Connect the supplied power cord to the CM. Plug the other end into a wall socket.
5