3M #3968, #3960 Running IQC, To run IQC manually, To run IQC automatically

Page 19

3M™ Rapid Detection Reader

Running Quality Control

Running IQC

IQC runs automatically every time the 3M Rapid Detection Reader is turned on. IQC can also be initiated manually or configured to run at predefined intervals. IQC takes less than 1 minute to complete.

When IQC is initiated, the appropriate tests are performed on each port in each attached TM. IQC verifies the power supply voltage, system memory, cartridge transport system, LED function and incubator function for heated assays. During IQC the system also determines system power, verifies the system clock and verifies the Reader calibration.

Should there be a test in progress in a port, IQC will begin for that port once the test cartridge is removed on assay completion. Results of the IQC are stored for each cartridge port in the IQC results database.

To run IQC manually:	Figure 13. IQC Status
1. From the Main Menu screen (Figure 4), touch Run IQC. If
1. From the Main Menu screen (Figure 4), touch Run IQC. If
prompted, enter the Operator ID and/or Password using either the
touch screen or barcode scanner. To accept the displayed
information, touch Accept. The IQC Status screen is displayed
(Figure 13).
NOTE: Both the Operator ID and Password are case-sensitive.
IQC is started on all idle ports and will automatically start as ports
become free.
become free.
2. Touch OK to return to the Main Menu. If IQC fails, the TM port
LED illuminates red, the port icon turns red and the failed port can
no longer be used. e.g.,

To run IQC automatically:

To run IQC automatically at predefined intervals, the Reader is configured using the RCU or the CM.

To configure the Reader to run IQC at defined intervals through the RCU, refer to Editing Settings Using the Reader Configuration Utility (RCU) section.

To configure the Reader to run IQC at defined intervals through the CM, refer to the Managing Settings section.

14

Image 19

Contents Operator Manual Made in Canada for Table of Contents Maintenance Iii Consult Accompanying Documents Consult Operator Manual Read all contents of this manual prior to useTo reduce the risk associated with incorrect results Summary of Warnings and PrecautionsTo reduce the risk of instrument or accessory damage To reduce the risk associated with hazardous voltageOverview IntroductionIntended Use Optional Accessories Available from 3M Unpacking and Setup3M Rapid Detection Reader Components § 3M Rapid Detection Control Module CM 3M Rapid Detection Reader SetupTo set-up 3M Rapid Detection Reader Barcode Scanner3M Rapid Detection Reader 3M Rapid Detection Test Module CM Port 3M Rapid Detection Control Module3M Rapid Detection Reader Modules Reader Configuration Utility RCU supplied with the CM. ForTurning on the 3M Rapid Detection Reader Port Identification Nomenclature Display IconsPerforming an Assay Using Lot CardsStarting an Assay Operator Entry Accept Running Quality ControlAssay Status Warnings LQC IconsTo run IQC manually Running IQCTo run IQC automatically Viewing Saved Results Working with Results and LogsViewing Saved Logs Searching Logs Searching ResultsResults Transfer Manually Transferring / Printing Results or LogsLQC Managing SettingsAssay Settings View TabsTimer Printer LoginPrivilege Requirements Login RequirementsNetwork Settings FileAbout Settings View About TabSettings Edit Tabs Edit SettingsTimers Misc Manual / Auto Transfer ModeDate/Time LanguageManaging Operators Restoring DefaultsSound To Add an Operator Adding/Modifying an OperatorSearching for an Individual Operator Touch Search or CancelTo Modify an Operator Getting Started Editing Settings Using the Reader Configuration Utility RCUInstallation LoginSetting Up Web Services Access Emergency Password Reset MechanismChoosing a Configuration File Access Method Setting Up a USB Flash DriveTo open all files for a group Accessing Configuration FilesTo open an Individual Configuration File Setting Up Communications Between RCU and ReadersFiles Touch Export to USB Flash Drive Identifying Readers through the RCUNon-networked Environment Networked EnvironmentExporting Files Importing FilesDelete Results Prior to Date Deleting ResultsExterior Cleaning MaintenancePossible device damage Disposal of Equipment Upgrading Device SoftwareRestoring the Supervisor Operator ID / Password TroubleshootingGeneral Fail Power On Self Test Message / IQC MessagesTest Run Messages No Available Ports. IQC Failed To StartInsertion Error Remove & Reinsert Followed by Timed Out ErrorLot Card Messages Settings Messages LQC Related Messages Printer Errors USB Device Errors Communications ErrorsUnrecognized USB Drive Attached, Remove Device Specifications Operating/Storage Operating temperatureStorage temperature Operating Humidity3M Rapid Detection Reader IndexRestoring Supervisor Operator ID Password Languages Upgrading Software See RCU USB