3M #3968, #3960 Login Requirements, Privilege Requirements, Network Settings, File Locations

Page 27

3M™ Rapid Detection ReaderManaging Settings

Settings: View Tabs

Tab

Screen

Login continued

Login Requirements
Purpose: Define login requirements independently for Operators
and Supervisors requiring None, ID and Password, ID only or
Password only. If None, an Operator ID cannot be entered when
running assays.
Default: Operators – None, Supervisors – ID and Password.
Privilege Requirements
Purpose: Defines the access privileges for each level user.
All Operators: Operators and Supervisors have access.
Supervisor only: Only Supervisors have access.
Default: Default settings are shown in Figure 25.

File	Figure 26. Settings: View File Tab
Edit through RCU only.
Purpose: Define network settings for the Reader
Network Settings
Manual Transfer mode: 3M Rapid Detection Reader is being
used without being connected to a shared network.
IP Address: Automatically assigned when the 3M Rapid
Detection Reader is connected to a network and in Auto transfer

mode.
MAC Address (Machine Address Control): This is a static
address that represents the identity of the 3M Rapid Detection
Reader.
Default: Manual Transfer Mode.
File Locations
Purpose: Define the directory where the 3M Rapid Detection
Reader files reside, defined when implementing connectivity
through the RCU.
Please consult the local IT administrator and the online help for
guidance on the use of these settings.

22

Image 27

Contents Operator Manual Made in Canada for Table of Contents Maintenance Iii Consult Accompanying Documents Consult Operator Manual Read all contents of this manual prior to useTo reduce the risk associated with incorrect results Summary of Warnings and PrecautionsTo reduce the risk of instrument or accessory damage To reduce the risk associated with hazardous voltageIntroduction OverviewIntended Use Unpacking and Setup Optional Accessories Available from 3M3M Rapid Detection Reader Components § 3M Rapid Detection Control Module CM 3M Rapid Detection Reader SetupTo set-up 3M Rapid Detection Reader Barcode Scanner3M Rapid Detection Reader 3M Rapid Detection Test Module CM Port 3M Rapid Detection Control ModuleReader Configuration Utility RCU supplied with the CM. For 3M Rapid Detection Reader ModulesTurning on the 3M Rapid Detection Reader Port Identification Nomenclature Display IconsUsing Lot Cards Performing an AssayStarting an Assay Operator Entry Accept Running Quality ControlAssay Status Warnings LQC IconsRunning IQC To run IQC manuallyTo run IQC automatically Working with Results and Logs Viewing Saved ResultsViewing Saved Logs Searching Logs Searching ResultsResults Transfer Manually Transferring / Printing Results or LogsLQC Managing SettingsAssay Settings View TabsTimer Printer LoginPrivilege Requirements Login RequirementsNetwork Settings FileAbout Settings View About TabEdit Settings Settings Edit TabsTimers Misc Manual / Auto Transfer ModeDate/Time LanguageRestoring Defaults Managing OperatorsSound To Add an Operator Adding/Modifying an OperatorTouch Search or Cancel Searching for an Individual OperatorTo Modify an Operator Getting Started Editing Settings Using the Reader Configuration Utility RCUInstallation LoginSetting Up Web Services Access Emergency Password Reset MechanismChoosing a Configuration File Access Method Setting Up a USB Flash DriveTo open all files for a group Accessing Configuration FilesSetting Up Communications Between RCU and Readers To open an Individual Configuration FileFiles Touch Export to USB Flash Drive Identifying Readers through the RCUNon-networked Environment Networked EnvironmentExporting Files Importing FilesDelete Results Prior to Date Deleting ResultsMaintenance Exterior CleaningPossible device damage Disposal of Equipment Upgrading Device SoftwareTroubleshooting Restoring the Supervisor Operator ID / PasswordGeneral Fail Power On Self Test Message / IQC MessagesTest Run Messages No Available Ports. IQC Failed To StartInsertion Error Remove & Reinsert Followed by Timed Out ErrorLot Card Messages Settings Messages LQC Related Messages Printer Errors USB Device Errors Communications ErrorsUnrecognized USB Drive Attached, Remove Device Specifications Operating/Storage Operating temperatureStorage temperature Operating Humidity3M Rapid Detection Reader IndexRestoring Supervisor Operator ID Password Languages Upgrading Software See RCU USB