3M #3968, #3960 manual Edit Settings, Settings Edit Tabs, Timers

Page 29

3M™ Rapid Detection Reader

Managing Settings

Edit Settings

From the Main Menu select Settings. Only a Supervisor, when in the default systems configuration, can access the Settings menu. (Refer to Access the Settings Menus for additional information.) Touch Edit Settings on the Settings menu, and use the tabs to select those settings to be changed.

On all the Settings: Edit dialogs:

∙Use the touch screen or dropdown lists to enter/select the desired settings.

∙Touch Save to save your settings.

∙Touch Cancel to return to the previous screen without saving your changes.

∙Touch Reset to undo entry and return to the default setting.

∙Touch Alt. Keys or Shift to display extended characters (available characters will vary depending on Language setting).

Settings: Edit Tabs

Tab	Screen
Timers	Figure 28. Settings: Edit Timer
	Tab

The ability to edit the settings of the TIMER tab varies by item and is defined with each item below.

IQC Interval (minutes) – Edit on CM and RCU.

Purpose: The interval between automatic IQC self-diagnostics.

Range: 0 – 1440 minutes.

Default: 0 (Disabled).

Menu Idle Timeout (minutes)

Edit on CM. Cannot be edited through RCU.

Purpose: Amount of idle time before the 3M Rapid Detection

Reader returns to the Home screen.

Range: 1 – 10 minutes.

Default: 5 minutes.

File	Figure 29. Settings: Edit File Tab

Edit on CM and RCU.

Purpose: Define the locations for the device, group and time server settings.

Please consult the local IT administrator and the online help for guidance on the use of these settings.

24

Image 29

Contents Operator Manual Made in Canada for Table of Contents Maintenance Iii Consult Accompanying Documents Consult Operator Manual Read all contents of this manual prior to useTo reduce the risk of instrument or accessory damage Summary of Warnings and PrecautionsTo reduce the risk associated with hazardous voltage To reduce the risk associated with incorrect resultsIntended Use IntroductionOverview 3M Rapid Detection Reader Components Unpacking and SetupOptional Accessories Available from 3M To set-up 3M Rapid Detection Reader 3M Rapid Detection Reader SetupBarcode Scanner § 3M Rapid Detection Control Module CM3M Rapid Detection Reader 3M Rapid Detection Test Module CM Port 3M Rapid Detection Control ModuleTurning on the 3M Rapid Detection Reader Reader Configuration Utility RCU supplied with the CM. For3M Rapid Detection Reader Modules Port Identification Nomenclature Display IconsStarting an Assay Using Lot CardsPerforming an Assay Operator Entry Accept Running Quality ControlAssay Status Warnings LQC IconsTo run IQC automatically Running IQCTo run IQC manually Viewing Saved Logs Working with Results and LogsViewing Saved Results Searching Logs Searching ResultsResults Transfer Manually Transferring / Printing Results or LogsLQC Managing SettingsAssay Settings View TabsTimer Printer LoginNetwork Settings Login RequirementsFile Privilege RequirementsAbout Settings View About TabTimers Edit SettingsSettings Edit Tabs Date/Time Manual / Auto Transfer ModeLanguage MiscSound Restoring DefaultsManaging Operators To Add an Operator Adding/Modifying an OperatorTo Modify an Operator Touch Search or CancelSearching for an Individual Operator Installation Editing Settings Using the Reader Configuration Utility RCULogin Getting StartedChoosing a Configuration File Access Method Emergency Password Reset MechanismSetting Up a USB Flash Drive Setting Up Web Services AccessTo open all files for a group Accessing Configuration FilesFiles Setting Up Communications Between RCU and ReadersTo open an Individual Configuration File Non-networked Environment Identifying Readers through the RCUNetworked Environment Touch Export to USB Flash DriveExporting Files Importing FilesDelete Results Prior to Date Deleting ResultsPossible device damage MaintenanceExterior Cleaning Disposal of Equipment Upgrading Device SoftwareGeneral TroubleshootingRestoring the Supervisor Operator ID / Password Test Run Messages Power On Self Test Message / IQC MessagesNo Available Ports. IQC Failed To Start FailInsertion Error Remove & Reinsert Followed by Timed Out ErrorLot Card Messages Settings Messages LQC Related Messages Printer Errors USB Device Errors Communications ErrorsUnrecognized USB Drive Attached, Remove Device Specifications Storage temperature Operating temperatureOperating Humidity Operating/Storage3M Rapid Detection Reader IndexRestoring Supervisor Operator ID Password Languages Upgrading Software See RCU USB