3M #3960, #3968 manual Settings View Tabs, Assay

Page 24

3M™ Rapid Detection ReaderManaging Settings

Settings: View Tabs

Tab

Screen

Assay

Figure 21. Settings: View Assay

 

Tab

Edit through RCU only.

Sample/Patient ID

Purpose: Define the field name as Patient ID or Sample ID.

Default: Patient ID.

String length can be set from 1 to 18.

Default: Min Length 1, Max Length 18.

New Assay Lockout

Purpose: Define ability of operators to perform assays not in the assay list. The assay list is displayed on the LQC-Assay List screen (Figure 9). Set as either Yes or No.

Yes: End users cannot run any assays that are not on the RCU defined assay list.

No: End users can run any 3M Rapid Detection Reader assay.

Default: No.

Predefined Notes

Purpose: Define up to 10 notes that an operator can attach one of these notes to each patient test result prior to removing the Test Cartridge from the TM. The Note becomes part of the result record when the Cartridge is removed from the TM.

NOTE: The predefined note can be up to 20 characters in length. Make sure the note entered through the RCU is less than or equal to 20 characters in length.

LQC

Figure 22. Settings: View LQC Tab

Edit through RCU only.

Default: Timer Reset (hours) = 0, LQC will not time-out.

Hide Numeric LQC Results

Purpose: To Hide LQC results and report only PASS/FAIL

Yes: Pass/Fail will be displayed in place of results.

No: Actual result will be displayed.

Default: No.

LQC Timeout Warning (% remaining)

Purpose: Define the percentage of the LQC interval remaining (if

LQC Timer is set in RCU) before LQC expires for any assay.

Default: 10%.

19

Image 24
Contents Operator Manual Made in Canada for Table of Contents Maintenance Iii Read all contents of this manual prior to use Consult Accompanying Documents Consult Operator ManualSummary of Warnings and Precautions To reduce the risk of instrument or accessory damageTo reduce the risk associated with hazardous voltage To reduce the risk associated with incorrect resultsIntroduction OverviewIntended Use Unpacking and Setup Optional Accessories Available from 3M3M Rapid Detection Reader Components 3M Rapid Detection Reader Setup To set-up 3M Rapid Detection ReaderBarcode Scanner § 3M Rapid Detection Control Module CM3M Rapid Detection Reader 3M Rapid Detection Control Module 3M Rapid Detection Test Module CM PortReader Configuration Utility RCU supplied with the CM. For 3M Rapid Detection Reader ModulesTurning on the 3M Rapid Detection Reader Display Icons Port Identification NomenclatureUsing Lot Cards Performing an AssayStarting an Assay Operator Entry Running Quality Control AcceptLQC Icons Assay Status WarningsRunning IQC To run IQC manuallyTo run IQC automatically Working with Results and Logs Viewing Saved ResultsViewing Saved Logs Searching Results Searching LogsManually Transferring / Printing Results or Logs Results TransferManaging Settings LQCSettings View Tabs AssayTimer Login PrinterLogin Requirements Network SettingsFile Privilege RequirementsSettings View About Tab AboutEdit Settings Settings Edit TabsTimers Manual / Auto Transfer Mode Date/TimeLanguage MiscRestoring Defaults Managing OperatorsSound Adding/Modifying an Operator To Add an OperatorTouch Search or Cancel Searching for an Individual OperatorTo Modify an Operator Editing Settings Using the Reader Configuration Utility RCU InstallationLogin Getting StartedEmergency Password Reset Mechanism Choosing a Configuration File Access MethodSetting Up a USB Flash Drive Setting Up Web Services AccessAccessing Configuration Files To open all files for a groupSetting Up Communications Between RCU and Readers To open an Individual Configuration FileFiles Identifying Readers through the RCU Non-networked EnvironmentNetworked Environment Touch Export to USB Flash DriveImporting Files Exporting FilesDeleting Results Delete Results Prior to DateMaintenance Exterior CleaningPossible device damage Upgrading Device Software Disposal of EquipmentTroubleshooting Restoring the Supervisor Operator ID / PasswordGeneral Power On Self Test Message / IQC Messages Test Run MessagesNo Available Ports. IQC Failed To Start FailError Insertion Error Remove & Reinsert Followed by Timed OutLot Card Messages Settings Messages LQC Related Messages Printer Errors Communications Errors USB Device ErrorsUnrecognized USB Drive Attached, Remove Device Specifications Operating temperature Storage temperatureOperating Humidity Operating/StorageIndex 3M Rapid Detection ReaderRestoring Supervisor Operator ID Password Languages Upgrading Software See RCU USB