3M #3960, #3968 manual Adding/Modifying an Operator, To Add an Operator

3M™ Rapid Detection Reader Managing Settings

2.From the Settings menu (Figure 20), touch Edit Operators. The Settings: Operators screen will open (Figure 34).

A complete list of all operators authorized to use the device with Display Name and Operator Type is displayed.

The 3M Rapid Detection Reader will store a maximum of 600 operators.

The default Operator List includes the Operator ID defined as SUPERVISOR; the Display Name as DefaultUser; the Type set as Supervisor. This is the default login (see step 1 above).

The Operator Login Requirements (Figure 34) determines if an Operator (Operator Type = Operator) requires an Operator ID and/or Password. The Operator Login Requirements can be set to None, Operator ID only, or ID and Password by selecting the € icon.

Figure 35. Settings: Operator Detail

NOTE: The login requirements for operators (Operator Type = Supervisor) are defined and changed through the RCU. The default Login Requirements for Supervisors is ID and Password (Figure 25).

3.To view detailed information for an Operator, touch the Operator’s entry and touch View.

4.To modify an existing operator, touch the Operator’s entry and touch Modify. The Add button changes to Modify. (For additional instructions see Adding/Modifying an Operator.)

5.To add a new operator, touch Add when no operator entry is highlighted. (For additional instructions see Adding/Modifying an Operator.)

6.To search for a specific operator, touch Search. (For additional instructions see Searching for an Individual Operator.)

7.To delete an operator, touch Delete Operator while viewing an operator’s details.

Adding/Modifying an Operator

The 3M Rapid Detection Reader will store a maximum of 600 operators.

Access the Settings: Operators: Add screen (Figure 36) as described above.

To Add an Operator

1.Enter the Operator ID, Display Name, Password, Verify and, if desired, the Expire information.

Operator ID: Characters entered to access 3M Rapid Detection Reader (Maximum length 18 characters).

Display Name: Characters displayed with results for this Operator ID (Maximum length 50 characters).

NOTE: Although 50 characters may be entered for a Display Name, the CM screen and print out will truncate. The full 50 character Display Name will only be visible in the Edit Operators screen in the Settings menu or through the RCU.

Password: Maximum length 18 characters.

Verify: Re-enter Password.

Figure 36. Settings: Operators: Add

27