3M #3968, #3960 manual Timer

Page 25

3M™ Rapid Detection ReaderManaging Settings

Settings: View Tabs

Tab

Screen

LQC continued

Max Failures Before Lockout

Purpose: Define the number of LQC failures allowed before the assay is Locked Out when LQC Timer is set in RCU. LQC Failure count is reset upon successful completion of LQC. Can be set from 1-9.

Default:	9.
Control ID
Purpose: Define control IDs.
Default: Min length 1, Max length 18.

Timer	Figure 23. Settings: View Timer
	Tab

The ability to edit the settings of the TIMER tab varies by item and is defined below.

Timer Intervals

Menu Idle Timeout

Edit on CM. Cannot edit through RCU.

Purpose: Define the amount of idle time before the 3M Rapid

Detection Reader returns to the Home screen.

Range: 1 -10 minutes.

Default: 5 minutes.

Update/Upload Start Date/Time

Edit through RCU only.

The date and time used to calculate the start of the following intervals.

Update Interval

Edit through RCU only.

Purpose: Interval at which the Reader checks for changes to settings in a networked environment. Disable by entering 0.

Range: 0 – 1440 minutes.

Default: 1.

Upload Results Interval

Edit through RCU only.

Purpose: Interval at which the Reader sends changes or additions to the result and event logs in a networked environment. Disable by entering 0.

Range: 0 - 1440 minutes.

Default: 0 (Disabled).

20

Image 25

Contents Operator Manual Made in Canada for Table of Contents Maintenance Iii Consult Accompanying Documents Consult Operator Manual Read all contents of this manual prior to useTo reduce the risk of instrument or accessory damage Summary of Warnings and PrecautionsTo reduce the risk associated with hazardous voltage To reduce the risk associated with incorrect resultsOverview IntroductionIntended Use Optional Accessories Available from 3M Unpacking and Setup3M Rapid Detection Reader Components To set-up 3M Rapid Detection Reader 3M Rapid Detection Reader SetupBarcode Scanner § 3M Rapid Detection Control Module CM3M Rapid Detection Reader 3M Rapid Detection Test Module CM Port 3M Rapid Detection Control Module3M Rapid Detection Reader Modules Reader Configuration Utility RCU supplied with the CM. ForTurning on the 3M Rapid Detection Reader Port Identification Nomenclature Display IconsPerforming an Assay Using Lot CardsStarting an Assay Operator Entry Accept Running Quality ControlAssay Status Warnings LQC IconsTo run IQC manually Running IQCTo run IQC automatically Viewing Saved Results Working with Results and LogsViewing Saved Logs Searching Logs Searching ResultsResults Transfer Manually Transferring / Printing Results or LogsLQC Managing SettingsAssay Settings View TabsTimer Printer LoginNetwork Settings Login RequirementsFile Privilege RequirementsAbout Settings View About TabSettings Edit Tabs Edit SettingsTimers Date/Time Manual / Auto Transfer ModeLanguage MiscManaging Operators Restoring DefaultsSound To Add an Operator Adding/Modifying an OperatorSearching for an Individual Operator Touch Search or CancelTo Modify an Operator Installation Editing Settings Using the Reader Configuration Utility RCULogin Getting StartedChoosing a Configuration File Access Method Emergency Password Reset MechanismSetting Up a USB Flash Drive Setting Up Web Services AccessTo open all files for a group Accessing Configuration FilesTo open an Individual Configuration File Setting Up Communications Between RCU and ReadersFiles Non-networked Environment Identifying Readers through the RCUNetworked Environment Touch Export to USB Flash DriveExporting Files Importing FilesDelete Results Prior to Date Deleting ResultsExterior Cleaning MaintenancePossible device damage Disposal of Equipment Upgrading Device SoftwareRestoring the Supervisor Operator ID / Password TroubleshootingGeneral Test Run Messages Power On Self Test Message / IQC MessagesNo Available Ports. IQC Failed To Start FailInsertion Error Remove & Reinsert Followed by Timed Out ErrorLot Card Messages Settings Messages LQC Related Messages Printer Errors USB Device Errors Communications ErrorsUnrecognized USB Drive Attached, Remove Device Specifications Storage temperature Operating temperatureOperating Humidity Operating/Storage3M Rapid Detection Reader IndexRestoring Supervisor Operator ID Password Languages Upgrading Software See RCU USB