Conair Servo Traveling Saw
Operator Control Instructions
Maint. Area
There are three
SELECT MAINT . AREA
Dirctn P/M Table
Exit or Prev- Pressing Exit or Prev will return the display to the Menu Area screen.
D i r c t n S o f t k e y
By pressing the soft key located under the word Dirctn on the Maint. Area Screen, the direction of the encoder can be changed.
COUNT DIRECTION IS
INCORRECT Change
Located on the lower left side of the display is the status text (INCORRECT/CORRECT) for the encoder direction.
Exit or Prev- Pressing Exit or Prev will return the display to the Maint. Area screen.
Change Softkey
With the machine stopped, by pressing the soft key located under the word Change. The direction of the encoder is reversed. After the change if the count direction is positive, the status text will now display the word CORRECT.
Appendix