Conair Servo Traveling Saw
Operator Control Instructions
Cycles Softkey
Pressing the soft key located under the word Cycles on the
MACH . CYCLES 00000000
Exit
P/M area screen, selects the machine cycles screen.
The Machine Cycles screen displays the total cycles that the machine has completed. This information could be used for scheduling preventive maintenance. The displayed total can not be reset.
Exit or Prev- Pressing Exit, Prev or the Softkey under the word Exit returns the display to the P/M area screen.
T a b l e S o f t k e y
Pressing the soft key located under the word Table on the Maint area screen. Selects the Table area screen. Two table
SELECT DIRECTION
Return Advance
travel direction
Exit or Prev- Pressing Exit or Prev returns the display to the Maint area screen.
Appendix