Bosch Power Tools 4410L manual Slide Action Adjustment, Adjust and Tighten Set Screw

! WARNING

Adjustments (continued)

Disconnect plug from power source before performing any assembly,

adjustment or repair to avoid possible injury.

Slide Action Adjustment

1. Locate the 4 Set Screws (A, B, C, & D) on the Rail Guide Housing. (Figure 1)

2. Loosen the Nut on Set Screw (A) with an adjustable wrench.

3. Tighten or loosen Set Screw (A) with the 4mm end of the bit on the multi-purpose tool until you achieve minimal slide play while maintaining the desired sliding force.

4. After adjusting Set Screw (A), hold Set Screw (A)

with a 4mm allen key and tighten the nut with anFigure 1. Set Screws adjustable wrench without moving the Set Screw.

(Figure 2)

5.Complete steps 2-4 with the remaining set screws in order as shown in figure 1.

Figure 2. Adjust and Tighten Set Screw

18.