Campbell Hausfeld DH550000AV, PW1605, PW1825, PW1835, PW1625 Assembly and Preoperation

Operating Instructions and Parts Manual

	Assembly and Preoperation		5
Assembly and Preoperation				6
			1
		Always make sure that
		the garden hose is
turned on before turning on the pressure			2
washer. Running the pressure washer
without water will damage the pumps seals.

Do not disassemble

the lance or gun on this Figure 7 - Attach cord holder (PW1625 only) pressure washer. Replacement parts are not

available for the gun or lance.

PW1625:

1.Attach cord holder (see Figure 7).

2.Attach high pressure hose to gun (see Figure 11).

3.	Attach lance to gun (see Figure 12).		Figure 8 - PW1825 only
4.	Attach garden hose to unit (see Figure
	13 and 15).	9
5.	Attach high pressure hose to high
	pressure outlet (see Figure 16).
PW1825:		8
1.	Slide handle (1) onto unit (see Figure
	8).	7
2.	Attach with 2 phillips screws.

3.Slide hose hook (6) onto front of pressure washer.

4.Attach with 2 phillips screws.

5.Slide soap tank (5) into handle.

6.Attach soap tube to unit (see Figure 10).

7.Attach high pressure hose to gun (see Figure 11).

8.Attach lance to gun (see Figure 12).

9.Attach garden hose to unit (see Figure 13 and 15).

10.Attach high pressure hose to high pressure outlet (see Figure 16).

PW1835:

1.Slide upper gun hook (9) onto unit (see Figure 9).

2.Rotate lower hook (7) into slot in unit.

3.Attach lower hook (7) with phillips screw (8).

4.Attach soap tube to unit (see Figure 10).

5.Attach high pressure hose to gun (see Figure 11).

Figure 9 - PW1835 only

Figure 11 - Attach high pressure hose to gun (all models)

Figure 13 - Attach garden hose to unit (models PW1625 and PW1825)

Figure 10 - Attach soap tube to unit (models PW1825 and PW1835 only)

Figure 12 - Attach lance to gun.

Water inlet

Water inlet

Figure 14 - Attach garden hose to unit (model PW1835 only)

10www.chpower.com