Bostitch BTE300K Intended USE, Assembly/ Set-Up, Adjusting the depth of cutfigURE F & G

Page 8

INTENDED USE

These circular saws are designed for professional wood cutting applications.

WARNING: DO NOT use water feed attachments with this saw.

WARNING: DO NOT use abrasive wheels or blades.

WARNING: DO NOT use under wet conditions or in presence of flammable liquids or gases.

Assembly/ Set-Up

WARNING: Always unplug saw from power supply before any of the following operations.

WARNING: Never modify the power tool or any part of it. Damage or personal injury could result.

Adjusting the depth of cut(figURE F & G)

The depth of cut should be set according to	F
the thickness of the workpiece.	F			13
• Loosen the lever (12) to unlock the saw				13
shoe (figures F).
• Move the saw shoe (5) into the desired
position. The corresponding depth of cut
can be read from the scale (13).
• Tighten the lever to lock the saw shoe in
place.
		5	12
			12
• Set depth adjustment of saw such that	G
one half of a tooth of the blade projects	G
below the workpiece as shown in figure G.
Setting the saw at the proper cutting depth
keeps blade friction to a minimum, removes
sawdust from between the blade teeth,
results in cooler, faster sawing and reduces
the chance of kickback.		Surface of wood		Tip of tooth
		Surface of wood

Adjusting the bevel angle (figURE H) The BTE300 can be set to bevel angles between 0° and 55°.

•Loosen the bevel locking lever (11) to unlock the saw shoe (5).

•Move the saw into the desired position. The corresponding bevel angle can be read from the scale (14).

•Tighten the locking lever to lock the saw in place.

H
14
5	11

8

Image 8

Contents 15A Safety Guidelines Definitions Work Area SafetyCAUSES and OPErATOr PrEvENTION of kIckbAck Additional SPEcIFIc Safety rULESSafety Instructions for All Saws Lower Guard Safety Instructions Total Length of Cord in Feet Symbols Functional Description Figure aSupporting Large Panels / Securing Workpiece Assembly/ Set-Up Adjusting the depth of cutfigURE F & GIntended USE Shoe figures FShoe adjustment Adjusting for 90 Degree CutsMaking adjustments to the depth and bevel levers Figure J To adjust the levers, follow the steps BelowAttaching the blade FigURE M Guard Against KickbackSwitch OperationTroubleshooting Pocket Cutting FIGURE OReplacement Parts Service and Repairs Scie circulaires 7-1/4 184mm, 15 Ampère Lignes directrices en matière de sécurité définitionsPage Page CONSIGNES DE SÉcUrITÉ rELATIvES AU PrOTèGE-LAME INFÉrIEUr Directives de sécurité supplémentaires Résulter des blessures corporelles gravesSymboles · le plomb dans les peintures à base de plombDescription Fonctionnelle Figure a Soutien de grands panneaux/fixation de la pièceRéglage de la profondeur de coupe fig. F et G Utilisation PrévueMontage/Réglage Réglage Pour Coupes À 90 Degrés Réglage de la semelleMise EN Garde Toujours Indicateur de trait de scie figure K Fixation et dépose de la lame Dépose de la lame Fig. LAssemblage de la lame Fig. M Pare-main inférieurFixation ET Depose D’UN Guide Longitudinal Figure n FonctionnementPROTÉGEZ-VOUS DES Effets DE Rebond InterrupteurConseils pour une utilisation optimale Découpe EN Poche Figure ORangement de la clé et des accessoires DépannageEntretien Pièces DE RechangeAccessoires Remplacement DES Étiquettes D’AVERTISSEMENTEntretien ET Réparation Garantie Limitée DE Trois ANSPautas DE SEGURIDAD/DEFINICIONES Page Peligro Causas DEL Retroceso Y SU Prevención POR Parte DEL Operador Madera antes de cortar Firmemente antes de utilizar la herramientaSímbolos Descripción DE LAS Funciones Figura a Ajuste de la profundidad de corte fig. F, g Ensamblaje/ConfiguraciónUSO Previsto Ajuste Para Cortes a 90 Grados Ajuste del ángulo de biseladoAjuste de zapata Colocación de la hoja FIG. M Protector inferior de la hojaIndicador de corte Figura K De la Figura MColocación Y Extracción DE UNA Guía DE Corte no Incluida en PC15TCSM Figura NFuncionamiento InterruptorConsejos para un uso óptimo Cortes Internos FIGURA ODetección de problemas ProblemaAlmacenamiento Para LA Llave Y LOS Accesorios Causa posible Solución posibleMantenimiento Piezas DE Repuesto Mantenimiento Y ReparacionesAccesorios Garantía Limitada DE Tres AnosReemplazo DE LAS Etiquetas DE Advertencia Page Catalog Number BTE300 Form June