Slant/Fin J-390 Viewing and Changing Temperatures, If outdoor sensor is used

32 Jaguar Model J-390

Table 4

VIEWING AND CHANGING TEMPERATURES

Press “SELECT” button for viewing different modes on “MODE DISPLAY”

		MODE		DESCRIPTION & TEMPERATURE DISPLAY
		DISPLAY
			Space heating supply water temperature could be changed by
				pressing “Up/Down” button. Settable from 90˚F to 185˚F
				(steps of 1 F). The default value is 176˚F.
		blinking		Press “Enter” button to store.
				(see note 1)
				Domestic hot water supply temperature could be changed by
				pressing”Up/Down” button. Settable from 104˚F to 185˚F
				(steps of 1 F). The default value is 176˚F.
				Press “Enter” button to store.
		blinking
				(see note 2)
				Domestic hot water tank temperature could be changed by
	Table 2	Table 1		pressing “Up/Down” button. Settable from 104˚F to 160˚F
			Table 3	(steps of 1 F). The default value is 140˚F.
	Table 2	Table 1
	Table 2	Table 1	Table 3
		Table 1
	Table 2		Table 3	Press “Enter” button to store.
Table 2		Table 1	Table 3
		blinking	Table 3	(see note 3)
				Temperature display shows actual supply water temperature.
				Temperature display shows actual return water temperature.
				Temperature display shows actual DHW tank temperature.
				(if the water tank is equipped with sensor).
				Temperature display shows actual flue gas temperature.
				Temperature display shows actual outside temperature.
				(if outdoor sensor is used)
NOTE:
		1- For space heating mode “0” (boilers not utilizing outdoor sensor))
		2- For DHW mode “2” (storage tank with Aquastat)
		3- For DHW mode “1” (storage tank with sensor)