Panasonic RPWF6000 Power supply preparations Headphones, Using the rechargeable battery supplied

Page 4

Power supply preparations: Headphones

Using the rechargeable battery (supplied)

The supplied rechargeable battery must be charged before using this unit.

Nickel-metal hydride rechargeable battery

Use the supplied battery or a dedicated replacement battery

RP-BP6000 (optional).

Commercially available rechargeable batteries

You cannot charge commercially available rechargeable batteries.

Inserting the supplied nickel-metal hydride rechargeable battery

1 Press the [BATT] knob on the left housing a to open the battery compartment lid b and then take it off.

2 Put the headphones on the transmitter making sure that the charging terminals fare in contact with each other.

gLeft housing

The battery can be charged with the headphones placed vertically or horizontally.

●The OPR/CHARGE lamp h on the transmitter glows red.

●The OPR/CHARGE lamp h goes out when the battery is fully charged.

●When putting the headphones on the transmitter, hold the left and right housings in each hand and put the headphones straight down onto the transmitter.

Placing the headphones vertically

ENGLISH

Placing the headphones horizontally

2

Insert the supplied nickel-metal hydride

 

rechargeable battery.

 

● Align the poles + and - correctly when inserting.

 

● Push down on the - pole spring when inserting.

 

Remove the + poles first when removing.

3

Insert the rib con the battery compartment

 

lid into the hole on the left housing and then

close the battery compartment lid. Push the battery compartment lid until it locks.

Charging

1 Connect the AC adaptor (supplied)

 

 

d to the transmitter.

Transmitter

To household AC outlet

Note

 

 

● The AC adaptor power cord (supplied) e is for use

 

 

with this unit only. Do not use it with other equipment.

 

 

Do not use cords from other equipment with this

 

 

unit.

To DC-IN 9V terminal

● Be sure to use the supplied AC adaptor.

 

RQT8948

6

Note

The headphones are recharged if they are put back onto the transmitter after being fully charged.

Do not keep recharging the battery if it is not used between recharges.

The battery will be overcharged causing overheating and electrolyte leakage.

For your reference

●Radio wave emission automatically stops when the headphones are placed onto the transmitter.

●The headphones can be used even if the battery is not fully charged.

●Disconnect the AC adaptor from the household AC outlet if the unit is not going to be used for a long time. This unit consumes a small amount of power (approximately 1.8 W) if the AC adaptor is connected, even when it is turned off.

The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet.

●Charge the battery in an environment with an ambient temperature between 0 °C and 40 °C or it may not be fully charged.

Charging and operating times

Charging time

Operating time ※1

Approx. 3 hours ※2

Approx. 8 hours ※3

※1At 1 kHz, 1 mW + 1 mW output.

※2Time required to fully charge from empty.

※3Operating times may differ depending on the temperature of the surrounding environment and operating conditions.

RQT8948

7

6

7

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Fones de ouvido surround digital sem fio Important Safety Instructions Control reference guide PrecautionsControl reference guide Power supply preparations Headphones Using the rechargeable battery suppliedCharging Charging and operating timesUsing alkaline dry cell batteries not included Power supply preparations HeadphonesConnections Placement of transmitter and headphones Connecting analog equipmentListening caution ConnectionsTime required for mode changes Decode Mode lamp lMaintenance Troubleshooting guidePress ID/TUNING on the transmitter once Press Surround to select the desired surround modeSpecifications Troubleshooting guideAccessoires fournis Si ce symbole apparaîtCaractéristiques Table des matièresNomenclature PrécautionsNomenclature Préparatifs d’alimentation casque Avec le bloc-batterie rechargeable fourniRecharge Temps de charge et de fonctionnementRaccordements Préparatifs d’alimentation casqueRaccordement à un appareil numérique Avec des piles alcalines vendues séparémentEmplacement de l’émetteur et du casque Protection de l’ouïeRaccordements Raccordement à un appareil analogiqueTemps requis pour les changements de mode Voyant du mode de décodeur Decode Mode lÉcoute d’un appareil raccordé à l’émetteur Lors de l’absence de son sur le casque fonction de sourdineAppuyez une fois sur la touche ID/TUNING de l’émetteur Sélection de l’effet de sonorité ambiophoniqueEntretien Guide de dépannageSpécifications Guide de dépannageÉmetteur RP-WF6000T Casque RP-WF6000HCaracterísticas ÍndiceGuía de referencia de los controles PrecaucionesGuía de referencia de los controles Tiempos de carga y funcionamiento Utilizando la batería suministradaCarga Conexiones Preparativos para el suministro de alimentación AuricularesUtilizando pilas secas alcalinas no incluidas Conexión de un equipo digitalColocación del transmisor y los auriculares Cuidados al escucharConexiones Conexión de un equipo analógicoLuz Decode Mode l Tiempo requerido para cambiar modosGuía para la solución de problemas Pulse una vez ID/TUNING en el transmisorSelección del campo de sonido ambiental MantenimientoGuía para la solución de problemas EspecificacionesTransmisor RP-WF6000T Auriculares RP-WF6000HAcessórios fornecidos SumárioGuia de referência dos controles PrecauçõesGuia de referência dos controles Usar as pilhas recarregáveis fornecidas CarregamentoTempos para carregar e de funcionamento Conecte o adaptador CA d Fornecido ao transmissorConexões Preparativos para o fornecimento de energia Fones de ouvidoConectar equipamento digital Usar pilhas secas alcalinas não incluídasConexões Cuidados ao ouvirConectar equipamento analógico Ouvir o som de um aparelho conectado ao transmissor Lâmpada Decode Mode lTempo necessário para mudança de modos Guia para solução de problemas Selecionar o campo surroundManutenção Ouvir o som de um aparelho conectado ao transmissorGuia para solução de problemas EspecificaçõesTransmissor RP-WF6000T Fones de ouvido RP-WF6000H De carregarFor U.S.A Panasonic Consumer Electronics Panasonic Puerto Rico, Inc

RPWF6000 specifications

The Panasonic RPWF6000 is a premium wireless speaker that represents the brand's commitment to delivering high-quality sound and innovative technology. Designed for music enthusiasts and casual listeners alike, this speaker blends style, functionality, and advanced audio capabilities.

One of the standout features of the RPWF6000 is its superior sound quality. The speaker is equipped with custom-tuned, high-resolution audio drivers that produce clear highs, rich mids, and deep bass. This balanced audio profile makes it suitable for a wide range of musical genres, enhancing the listening experience whether you're enjoying classical music, rock, or jazz. Additionally, the speaker employs an advanced acoustic design that ensures consistent sound dispersion, allowing listeners to enjoy their favorite tunes from different angles without compromising audio quality.

Connectivity is another key aspect of the RPWF6000. The speaker features Bluetooth technology, allowing users to easily pair their smartphones, tablets, or laptops for seamless music streaming. In addition to Bluetooth, it incorporates Wi-Fi connectivity, enabling access to music streaming services and internet radio. The integration with voice assistant technology, such as Amazon Alexa and Google Assistant, adds an extra layer of convenience, allowing users to control their music and compatible smart home devices through voice commands.

The design of the RPWF6000 is both elegant and functional. With a sleek, modern aesthetic, this speaker can complement any home decor. Its compact size makes it easy to place in various settings, from living rooms to offices. The robust build quality ensures that it can withstand daily use while maintaining a stylish appearance.

Battery life is a significant consideration for portable speakers, and the RPWF6000 excels in this area. It offers extended playtime on a single charge, making it ideal for outdoor gatherings or travel. The speaker also features quick charging technology, allowing users to recharge the battery in a short amount of time.

Moreover, the RPWF6000 provides multi-room audio capabilities, allowing users to synchronize multiple speakers throughout their home for a cohesive sound experience. This feature is perfect for setting the mood for parties or enjoying music in different rooms without having to compromise on quality.

In summary, the Panasonic RPWF6000 is a versatile and high-performance wireless speaker that combines cutting-edge technology with exceptional audio quality. Its thoughtful design, extensive connectivity options, and impressive battery life make it a standout choice for anyone looking to elevate their music listening experience. Whether for home use or on the go, the RPWF6000 delivers an audiophile-grade performance that is hard to beat.
Top Page Image Contents