SCC-641(P) Installation
1. [Figure 1] Install the structure on the ceiling.
(Refer to Installation reference for the Length of the structure) * Built in by the builder of the structure
[Figure 1]
Lenght of ceiling Hole
2. Make a hole in the ceiling where the camera will be installed. (The hole should be about 180)
3. [Figure 2] Assemble the BRKT-ANCHOR on the ceiling and screw the 4 bolts in.
[Figure 2]
4. [Figure 3,4] Connect the various cables to the CAMERA ADAPTER. (See page 2-6)
[Figure 3]
[Figure 4]
5.[Figure 5] Match the BRKT-ANCHOR and CAMERA ADAPTER and use 4screws (PH M4x8) to assemble them.
[Figure 5]
E