Using the Turbo function
You can set the Turbo function to provide fast and powerful cooling (heating).
When the air conditioner is operating in Cool or Heat mode;
1. Press the Turbo button.
- (Turbo) will be displayed and the function will operate for 30 minutes.
Cancel ffPress the Turbo Button.
• Turbo function is only available in Auto/Cool/Heat* mode and the air
|
|
| conditioner will return to its previous operation mode after operating for | ||
NOTE | |||||
30 minutes in this function. (Applicable model: AP50M1✴) | |||||
|
|
| |||
|
|
| • Air flow direction can be adjusted. | ||
|
|
| • Temperature and fan speed cannot be adjusted. | ||
|
|
| • If you select the Turbo function while Long/Single user function is on, | ||
|
|
| corresponding function will be cancelled. | ||
|
|
| • You can also turn on/off the Turbo function with the Options button. | ||
|
|
| (1) | Press the Options button. | |
|
|
| (2) | Press the <, > or Options button until (Turbo) indicator starts to blink. | |
|
|
| (3) | Press the SET button to set the Turbo function. | |
ENGLISH
Remote controller display
19