Samsung AP50M0ANXSG, AP50M1ANXSG manual Trap

		Indoor unit			Indoor unit
		Outdoor
		unit
		Indoor unit		Fix the pipe
		10m
than10m		Lessthan	than6m			S-TRAP	ENGLISH
	Outdoor			Outdoor	Fix the	(Every 10 m)
Less	unit		Less		pipe
				unit

4.Install the high pressure pipe to the heat exchanger liquid pipe, and the low pressure pipe to the heat exchanger gas pipe respectively using the flare nut, taking care not to cause any leakage of refrigerant.

5.Be sure to insulate the pipe with appropriate insulation material. (Refer to page 40.)

6. Insert the extension drain hose to the drain connection port tightly, then fix them with a cable tie or a tape to prevent any water leakage; see page 43.

7. After completion of the installation, check the connecting area for any gas leakage.

8. Wind a finish tape when the wiring of the refrigerant pipe, the unit, and the drain piping are completed.

9. Fix the piping and drain hose by using the indoor unit piping holder.

	Outdoor unit
	checking area
Indoor unit piping holder	Indoor unit checking area

Mirage_AP50M0@_IBIM_EN_05323A-02.indd 39

39

2016-05-19 오후 1:27:24