How to connect your extended power cables
1. Prepare the following tools:
Tools | Crimping pliers | Connection sleeve (mm) | Insulation tape | Contraction tube (mm) |
Spec | 20xØ6.5(HxOD) | Width 19 mm | 70xØ8.0 (LxOD) | |
Shape |
|
|
|
|
2.As shown in the figure, peel off the shields from the rubber and wire of the power cable.
20 mm of the wire shields of the tube. | ||
| • | After peeling off the tube wire, you must insert a contraction |
| ||
| ||
CAUTION | tube. |
•For information about the power cable specifications for indoor and outdoor units, refer to the installation manual.
Power cable |
|
|
|
20 |
| 20 | 20 |
|
|
| 60 |
|
| 120 |
|
| 180 | (Unit: mm) | |
|
|
3. Insert both sides of core wire of the power cable into the connection sleeve.
ffMethod 1
Push the core wire in to the sleeve from both sides.
ffMethod 2
Twist the wire cores together and push it in to the sleeve.
Connection sleeve
Connection sleeve
50