Finalizing the Installation (for qualified installers only) 2 9
1Remove the glass (and arch covers) following the directions below.
Warning: The appliance must be completely cool before removing the glass.
Warning: To prevent damage, do not abuse, strike, or slam the glass shut.
Note : Attach the arch covers after
Open the six latches holding the glass a frame in place (start with the bottom
three) - follow the directions shown to the right.
| Glass Frame |
b | Lift the glass frame up and |
pull it forward to remove. | |
| NOTE: |
You may need to lift the glass frame while
Re-Attaching the Glass Frame:
a)Hang the glass frame on the firebox.
b)While holding in place, attach the upper latches (follow the instructions to the right in reverse).
c)Lift the glass frame slightly and attach the lower latches.
Arch Covers (both sides)
| The arch covers (included |
Glass | in the owner's pack) block |
Frame | light from exiting the scroll |
| work on arched faces. |
| The covers hang on the |
| glass frame. |
| Arch Faces: |
| Attach arch covers before |
Arch Cover | installing the face. |
| Rectangular Faces: |
| Discard the arch covers. |
Spring Pin Insert the 1/4” key into the spring
Top of | pin. |
Firebox |
|
Glass
Twist 1/4 turn.
Latch Bracket | The spring pin will |
| disengage from the |
| latch bracket, |
| opening the latch. |
Glass
Travis Industries | 4050114 | 1 0 0 - 0 1 1 4 9 |