FireplaceXtrordinair 44 DV XXL EF manual Wall or Ceiling Mounting

Optional Equipment (for qualified installers only) 5 1

2 Attach the blower box to the framing or floorboards of the home following the instructions below.

Wall or Ceiling Mounting

a	Cut a hole between wall	b	Attach the wall mounting	c	Slide the blower, with
	framing members for the		brackets to the blower box.		wires, into the hole cut
	blower assembly.				in step "a". Attach
					with four screws.

5-1/4"

16"*

Mount the bracket to these holes for 2 x 4 walls

Mount the bracket to these holes for 2 x 6 walls

* This blower was designed for framing on 16" centers - construct additional framing if needed.

Floor Mounting

a	Cut a hole between floor joists	b	Attach the floor boot to the blower box with the included screws.
	for the blower box.
			The screws
			attach to either
	5-1/4"		of these pairs of
			holes. Use the
	14"		upper pair for
			thick flooring, the
			lower pair for
			thin flooring.

Slide the blower into the hole c cut in step "a". Attach with four

screws.

Travis Industries 4050114 1 0 0 - 0 1 1 4 9