Nilfisk-ALTO 653E manuel dutilisation Machine Operation SCRUBBING/DRYING

ENGLISH USER MANUAL

MACHINE OPERATION (SCRUBBING/DRYING)

1.Start the machine as shown in the previous paragraph.

2.If necessary, press the solution flow control switches (54) as necessary, depending on the type of cleaning to be performed.

3.If necessary, turn the squeegee adjusting handwheel (23) so that the rear blade touches the floor along all its length.

4.If necessary, stop the machine and turn the adjusting handwheel (37); when turning it clockwise or counter-clockwise the machine forward speed can be adjusted.

5.If necessary, stop the machine and turn the forward speed adjusting handwheel (38) as shown below:

•Turn it counter-clockwise to increase the forward speed;

•Turn it clockwise to decrease the forward speed.

NOTE

For correct scrubbing/drying of floors at the sides of the walls, Nilfisk Alto suggests to go near the walls with the right side of the machine as shown in figure 2.

A

B

P100106A

Figure 2

CAUTION!

To avoid any damage to the floor surface, turn off the brushes/pad-holders when the machine stops in one place.

12

SCRUBTEC 653E 9097060000(2)2009-10 A