Needle clamp
FLat ""
s+<:_e
away
Lrom
You
•Accessory Storage Box
The lid ot the accessory storagebox lifts open toward you.
Sewing accessories are conveniently located in the box.
%. | ........ | J |
•
To Remove the Extension Table (for
1.Grip the table with your index finger and thumb, as shown.
2.Pull gently to the left. The extension table will snap out.
To Attach the Extension Table
(for
1.insert the tab and the pin into their catches,
2.With your thumb and index finger, gently snap in.
.... | J |
• Change the Presser Foot |
|
Use the correct presser foot lor the stitch you wish to sew+
To change presser leet, raise the presser bar to its highest position by lilting the presser toot lever.
Loosen the presser toot thumb screw, choose the proper foot, insert item the bottom.
Tighten the screw using the large screw driver to make certain the foot is secure.
Choose the Needle and Thread
•To Change the Needle
NOTE: Raise the needle bar to its highest position by turning the hand wheel toward you.
1+ Loosen the needle clamp screw by turning it toward you+
2.Remove the needle by pulling it downward.
3.insert the new needle into the needle clamp with the flat side away from you.
4.Push the needle up as lar as it will go.
5.Tighten the needle clamp screw firmly with the large screwdriver from the accessory box.