Singer 160 Spool Pins, Presser Foot Lifter, Feed DOG Control, Converting to FREE-ARM Sewing

Page 14

SPOOL PINS

HORIZONTAL SPOOL PIN for normal thread spool

Place thread spool on the pin and secure with a spool cap to ensure smooth flow of thread. If the thread spool has a thread retaining slit, it should be placed to the right.

Select the correct spool pin cap according to the type and diameter of spool being used. The diameter of the spool pin cap should always be larger than that of the spool itself.

VERTICAL SPOOL PIN for large thread spool

Attach the spool pin. Place the felt disc over it. Place a thread spool on the spool pin.

PRESSER FOOT LIFTER

There are three positions for your presser foot.

1.Lower the presser foot to sew.

2.Raise the lifter to the middle position to insert or remove fabric, and to change presser foot.

3.Lift it to its highest position to insert or to remove thick fabric.

NOTE: If you start the machine with presser foot raised, it will alert you with a beep sound to lower the presser foot to sew.

FEED DOG CONTROL

The feed dogs control the movement of the fabric that is being sewn. They should be raised for all general sewing purposes and lowered for darning, freehand embroidery and monogramming so that you, not the feed dogs, are moving the fabric.

You will see the feed dog control when you remove the extension table.

CONVERTING TO FREE-ARM SEWING

Your machine can be used either as a flat-bed or as a free- arm model.

With the extension table in position, it provides a large working surface as a standard flat-bed model.

To remove the extension table, hold it firmly with both hands and pull it off to the left as shown. To replace, slide the extension table back into place until it clicks.

With the extension table removed the machine converts into

aslim free-arm model for sewing children’s clothes, cuffs, trouser legs, and other hard-to-reach places.

Spool

Bobine

Carrete

Felt disc

Rondelle feutre

Disco del pasador carrete

Vertical spool pin

Porte-bobine vertical

Pasador de carrete vertical

Thread retaining slit

Fente de retenue de fil

Ranura de retención de hilo

Spool pin cap

Spool

Spool pin

Porte-bobine

Chapeau de bobine

Bobine

Pasador carrete

Tapa del pasador carrete

Carrete

 

Down

Feed dog control

Levier de contrôle des griffes

Basse

Control de dientes

Abajo

 

 

 

 

 

 

 

 

 

 

 

12

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 160 Important Safety Instructions Importantes Consignes DE Sécurité Importantes Instrucciones DE Seguridad Table of Contents Table DES Matières Version pour l’EuropeIndice DE Contenidos Para versión europeaKnowing Your Sewing Machine Machine IdentificationDescription Description DE LA Machine À CoudrePrincipales Partes DE LA Maquina Identification DE LA MaquinaAccessories Accessoires Accesorios Setting UP Your Machine Power line cord/FOOT ControlPréparation DE LA Machine Préparacion DE LA MaquinaFeed DOG Control Spool PinsPresser Foot Lifter Converting to FREE-ARM SewingLevier DU Pied Presseur PORTE-BOBINEPorta Carretes Palanca PIE PrensatelasWinding the Bobbin Be sure to use Class 15 J bobbinsAssurez-vous d’utiliser des bobines de type « Classe 15 J » Préparation DE LA CanetteDevanado DE LA Bobina Este seguro de usar clase 15 J bobinasThreading the Bobbin Thread Enfilage DU FIL DE LA Canette Enhebrado DEL Hilo DE LA BobinaThreading the TOP Thread Enfilage DU FIL Supérieur Enhebrado DEL Hilo SuperiorMake sure that the guide doesn’t touch fabric, etc Using Automatic Needle ThreaderUtilisation DE L’ENFILEUR DE Chas D’AIGUILLE Assurez-vous que le guide ne touche pas au tissu, ectUSO DEL Ensatador Automatico Asegúrese de que la guía no toque la tela, etcTabla DE HILO, Aguja Y Material NEEDLE, Thread and Fabric ChartTableau DES TISSUS, DU Fils ET DES Aiguilles Changing the needle Bobbin Tension Adjusting TOP Thread TensionStraight Stitching Changing Presser FootRéglage DE LA Tension DU FIL Supérieur Ajuste DE LA Tension DEL Hilo SuperiorStitch length and width/needle position controls Control Panel FunctionsPattern selection buttons Bouton de sélection des motifs Fonctions DU Panneau DE CommandeFunciones DEL Panel DE Control Botones de selección de puntadaReverse stitch function for straight and zigzag stitches Reverse Operation ButtonDual purpose reverse/tacking stitch button Tacking stitch function for tie-off of other stitchesBouton double usage point marche arrière/point d’arrêt Bouton D’OPÉRATION DU Point DE Marche ArrièreInterruptor DE Funcionamiento Interruptor de costura hacia atrás/remateQuick Reference Starting to SEW Pour CoudreEmpezer a Coser Table of Stitch0.6 Keeping Seams Straight Fine tuning of the tension may be desiredStraight Stitching Stitch width control is used to change the needle PositionPour Garder LA Couture Droite Point DroitPuntada Recta Manteniendo LA Puntada DerechaInserting Zippers and Piping HAND-LOOK Quilt StitchPuntada DE Acolchado Continua Insérer UN Fermeture À Glissière OU UN PassepoilInsercion DE Cremalleras Y Vivo Zigzag Stitching Adjusting Stitch Width and LengthPlacement of Patterns Satin StitchPoint Bourdon Réglage DE LA Largeur ET DE LA Longueur DU PointAjuste DEL Ancho Y Largo DE Puntada Puntada DE RellenoBlindhem Stitch MULTI-STITCH ZigzagZigzag MULTI-POINT Point InvisiblePuntada Invisible ZIG-ZAG DE Tres PuntadasRIC-RAC Stitch Stretch and Decorative StitchesStraight Stretch Stitch Honeycomb StitchPoint Décoratifs ET Points Extensibles Puntadas Elasticas Y DecorativasBlanket Stitch Feather StitchPIN Stitch Ladder StitchPoint DE Languette Point PlumePoint Épingle Point D’ÉCHELLEIdeas on Design Stitching Entredeux StitchDecorative Patterns Continuous PatternsMotifs EN Continus Points DécoratifsDiseños DE Bordados Decorativos Pose DE BoutonsSewing a Buttonhole Using Buttonhole FootProcedure Confection DES Boutonnières Confeccion DE OjalesCorded Buttonholes Buttonholing with HARD-TO-SEW FabricsBoutonnière SUR DES Tissus Difficile À Coudre Boutonnière Gansées RenforcéesOjales CON Cordon Haciendo Ojales EN Materiales Dificiles DE CoserCaring for Your Machine Cleaning Hook Area and Feed DogsCleaning the sewing machine and foot controller Nettoyage DES Griffes ET Autour DU Crochet Entretient DE LA MachineCuide SU Maquina Nettoyage de la machine à coudre et du rhéostatThreading the Twin Needle Other InformationSatin Stitch Foot Straight Stitch Needle PositionRenseignements Additionnelles Otra InformaciónPerformance Checklist General ProblemsVérification DES Problèmes Mineur DE Couture Cuadro DE Verificacion DE RendimientoSystem Error Helpful MessagesErreur DU Système Messages D’AIDEMensajes DE Ayuda /1

160 specifications

The Singer 160 is a remarkable sewing machine that pays homage to the rich legacy of Singer sewing as it celebrates its 160th anniversary. This versatile sewing machine combines traditional craftsmanship with modern technology, making it an ideal choice for both beginners and experienced sewers.

One of the standout features of the Singer 160 is its robust metal frame, which ensures durability and stability during operation. This substantial construction minimizes vibrations, allowing for precise stitching even at high speeds. The machine boasts a powerful motor that delivers a maximum sewing speed of 750 stitches per minute, making it capable of handling various sewing projects efficiently.

The Singer 160 comes equipped with 23 built-in stitches, including essential utility stitches, decorative stitches, and an automatic 1-step buttonhole function. This wide array of stitch options provides sewers with the creative freedom to tackle projects ranging from simple repairs to intricate designs. The stitch selection is easy to navigate, thanks to a user-friendly dial positioned on the front of the machine.

Another notable characteristic of the Singer 160 is its adjustable stitch length and width, which allows users to customize their stitches based on project requirements. This feature is particularly useful for creating professional-looking hems or intricate appliqués. Additionally, the machine includes a drop-in bobbin system that simplifies threading and makes it easy to monitor thread supply.

The Singer 160 also incorporates modern technological advancements that enhance user experience. One of these is the automatic needle threader, which saves considerable time and frustration, especially for those new to sewing. The machine is also equipped with an LED sewing light that illuminates the sewing area, providing better visibility for detailed projects.

For convenience, the Singer 160 comes with a variety of presser feet to facilitate different sewing tasks. These include the all-purpose foot, zipper foot, buttonhole foot, and more, allowing users to tackle an extensive range of sewing applications with ease. Moreover, the machine's compact and lightweight design makes it easily portable, ideal for quilters or sewers who attend classes or workshops.

In summary, the Singer 160 celebrates sewing tradition while integrating modern features that cater to today’s sewing enthusiasts. Its durability, range of built-in stitches, ease of use, and additional features make it a standout choice in the sewing machine market. Whether you are mending clothes, creating home décor, or embarking on more complex sewing projects, the Singer 160 provides the reliability and performance needed to bring your creative visions to life.
Top Page Image Contents