Singer 160 instruction manual Performance Checklist, General Problems

Page 56

5. PERFORMANCE CHECKLIST

GENERAL PROBLEMS

Machine does not sew.

*Power switch is turned off.- Turn on the switch.

*Buttonhole lever is not raised when sewing stitch patterns.

–Raise buttonhole lever.

*Buttonhole lever is not lowered when sewing buttonhole.

–Lower buttonhole lever.

*Bobbin winder is engaged. – Disengage bobbin winder (see page 14 - 15).

*Presser foot is not lowered - Lower presser foot.

Machine jams/knocks.

*Thread is caught in hook.- Clean hook (see page 50 - 51).

*Needle is damaged.- Replace needle (see page 23).

Fabric does not move.

*Presser foot is not lowered - Lower presser foot.

*Stitch length is too short - Lengthen stitch length.

*Feed dogs are lowered - Raise feed dogs.

STITCHING PROBLEMS

Machine skips stitches.

*Needle is not all the way up into needle clamp(see page 23).

*Needle is bent or blunt. - Replace needle (see page 23).

*Machine is not threaded correctly (see page 18 - 19).

*Thread is caught in hook. - Clean hook (see page 50 - 51). Stitches are irregular.

*Needle size is not correct for thread and fabric (see page 22).

*Machine is not threaded correctly (see page 18 - 19).

*Top thread tension is too loose (see page 24 - 25).

*Fabric is being pulled or pushed against machine feeding action. - Guide it gently.

*Bobbin has not been wound evenly. - Rewind bobbin.

Needle breaks.

*Fabric is being pulled or pushed against machine feeding action. - Guide it gently.

*Needle size is not correct for thread and fabric (see page 22).

*Needle is not all the way up into the needle clamp (see page

23).

*Twin needle is being used but stitch width is set too wide (see page 52 - 53).

THREAD PROBLEMS

Thread bunches.

* Top and bobbin threads are not drawn back under presser foot before starting seam. - Draw both threads back under presser foot about 6 inches (10 cm) and hold until a few stitches are formed.

Needle thread breaks.

*Machine is not threaded correctly (see page 18 - 19).

*Top thread tension is too tight (see page 24 - 25).

*Needle is bent. - Replace needle (see page 23).

* Needle size is not correct for thread and fabric (see page 22).

Bobbin thread breaks.

* Bobbin case is not threaded correctly (see page 16 - 17).

*Lint accumulates in bobbin case or hook. - Remove lint (see page 50 -51).

Fabric puckers.

*Top thread tension is too tight. - Adjust thread tension (see page 24 - 25).

*Stitch length is too long for sheer or soft fabric. - Shorten stitch length.

54

Page 55 Page 57
Image 56
Page 55 Page 57
Contents 160 Important Safety Instructions Importantes Consignes DE Sécurité Importantes Instrucciones DE Seguridad Table of Contents Table DES Matières Version pour l’EuropeIndice DE Contenidos Para versión europeaKnowing Your Sewing Machine Machine IdentificationDescription DE LA Machine À Coudre Principales Partes DE LA MaquinaDescription Identification DE LA MaquinaAccessories Accessoires Accesorios Setting UP Your Machine Power line cord/FOOT ControlPréparation DE LA Machine Préparacion DE LA MaquinaSpool Pins Presser Foot LifterFeed DOG Control Converting to FREE-ARM SewingPORTE-BOBINE Porta CarretesLevier DU Pied Presseur Palanca PIE PrensatelasWinding the Bobbin Be sure to use Class 15 J bobbinsPréparation DE LA Canette Devanado DE LA BobinaAssurez-vous d’utiliser des bobines de type « Classe 15 J » Este seguro de usar clase 15 J bobinasThreading the Bobbin Thread Enfilage DU FIL DE LA Canette Enhebrado DEL Hilo DE LA BobinaThreading the TOP Thread Enfilage DU FIL Supérieur Enhebrado DEL Hilo SuperiorUsing Automatic Needle Threader Utilisation DE L’ENFILEUR DE Chas D’AIGUILLEMake sure that the guide doesn’t touch fabric, etc Assurez-vous que le guide ne touche pas au tissu, ectUSO DEL Ensatador Automatico Asegúrese de que la guía no toque la tela, etcTabla DE HILO, Aguja Y Material NEEDLE, Thread and Fabric ChartTableau DES TISSUS, DU Fils ET DES Aiguilles Changing the needle Adjusting TOP Thread Tension Straight StitchingBobbin Tension Changing Presser FootRéglage DE LA Tension DU FIL Supérieur Ajuste DE LA Tension DEL Hilo SuperiorStitch length and width/needle position controls Control Panel FunctionsPattern selection buttons Fonctions DU Panneau DE Commande Funciones DEL Panel DE ControlBouton de sélection des motifs Botones de selección de puntadaReverse Operation Button Dual purpose reverse/tacking stitch buttonReverse stitch function for straight and zigzag stitches Tacking stitch function for tie-off of other stitchesBouton D’OPÉRATION DU Point DE Marche Arrière Interruptor DE FuncionamientoBouton double usage point marche arrière/point d’arrêt Interruptor de costura hacia atrás/remateStarting to SEW Pour Coudre Empezer a CoserQuick Reference Table of Stitch0.6 Fine tuning of the tension may be desired Straight StitchingKeeping Seams Straight Stitch width control is used to change the needle PositionPoint Droit Puntada RectaPour Garder LA Couture Droite Manteniendo LA Puntada DerechaInserting Zippers and Piping HAND-LOOK Quilt StitchPuntada DE Acolchado Continua Insérer UN Fermeture À Glissière OU UN PassepoilInsercion DE Cremalleras Y Vivo Adjusting Stitch Width and Length Placement of PatternsZigzag Stitching Satin StitchRéglage DE LA Largeur ET DE LA Longueur DU Point Ajuste DEL Ancho Y Largo DE PuntadaPoint Bourdon Puntada DE RellenoBlindhem Stitch MULTI-STITCH ZigzagPoint Invisible Puntada InvisibleZigzag MULTI-POINT ZIG-ZAG DE Tres PuntadasStretch and Decorative Stitches Straight Stretch StitchRIC-RAC Stitch Honeycomb StitchPoint Décoratifs ET Points Extensibles Puntadas Elasticas Y DecorativasFeather Stitch PIN StitchBlanket Stitch Ladder StitchPoint Plume Point ÉpinglePoint DE Languette Point D’ÉCHELLEEntredeux Stitch Decorative PatternsIdeas on Design Stitching Continuous PatternsPoints Décoratifs Diseños DE Bordados DecorativosMotifs EN Continus Pose DE BoutonsSewing a Buttonhole Using Buttonhole FootProcedure Confection DES Boutonnières Confeccion DE OjalesCorded Buttonholes Buttonholing with HARD-TO-SEW FabricsBoutonnière Gansées Renforcées Ojales CON CordonBoutonnière SUR DES Tissus Difficile À Coudre Haciendo Ojales EN Materiales Dificiles DE CoserCaring for Your Machine Cleaning Hook Area and Feed DogsCleaning the sewing machine and foot controller Entretient DE LA Machine Cuide SU MaquinaNettoyage DES Griffes ET Autour DU Crochet Nettoyage de la machine à coudre et du rhéostatOther Information Satin Stitch FootThreading the Twin Needle Straight Stitch Needle PositionRenseignements Additionnelles Otra InformaciónPerformance Checklist General ProblemsVérification DES Problèmes Mineur DE Couture Cuadro DE Verificacion DE RendimientoSystem Error Helpful MessagesErreur DU Système Messages D’AIDEMensajes DE Ayuda /1

160 specifications

The Singer 160 is a remarkable sewing machine that pays homage to the rich legacy of Singer sewing as it celebrates its 160th anniversary. This versatile sewing machine combines traditional craftsmanship with modern technology, making it an ideal choice for both beginners and experienced sewers.

One of the standout features of the Singer 160 is its robust metal frame, which ensures durability and stability during operation. This substantial construction minimizes vibrations, allowing for precise stitching even at high speeds. The machine boasts a powerful motor that delivers a maximum sewing speed of 750 stitches per minute, making it capable of handling various sewing projects efficiently.

The Singer 160 comes equipped with 23 built-in stitches, including essential utility stitches, decorative stitches, and an automatic 1-step buttonhole function. This wide array of stitch options provides sewers with the creative freedom to tackle projects ranging from simple repairs to intricate designs. The stitch selection is easy to navigate, thanks to a user-friendly dial positioned on the front of the machine.

Another notable characteristic of the Singer 160 is its adjustable stitch length and width, which allows users to customize their stitches based on project requirements. This feature is particularly useful for creating professional-looking hems or intricate appliqués. Additionally, the machine includes a drop-in bobbin system that simplifies threading and makes it easy to monitor thread supply.

The Singer 160 also incorporates modern technological advancements that enhance user experience. One of these is the automatic needle threader, which saves considerable time and frustration, especially for those new to sewing. The machine is also equipped with an LED sewing light that illuminates the sewing area, providing better visibility for detailed projects.

For convenience, the Singer 160 comes with a variety of presser feet to facilitate different sewing tasks. These include the all-purpose foot, zipper foot, buttonhole foot, and more, allowing users to tackle an extensive range of sewing applications with ease. Moreover, the machine's compact and lightweight design makes it easily portable, ideal for quilters or sewers who attend classes or workshops.

In summary, the Singer 160 celebrates sewing tradition while integrating modern features that cater to today’s sewing enthusiasts. Its durability, range of built-in stitches, ease of use, and additional features make it a standout choice in the sewing machine market. Whether you are mending clothes, creating home décor, or embarking on more complex sewing projects, the Singer 160 provides the reliability and performance needed to bring your creative visions to life.
Top Page Image Contents