◗Do not use the blade to chop very hard ingredients like coffee beans, nutmeg and ice cubes.The blade might get blunt.
If food sticks to the blade or to the inside of the bowl:
1Switch the appliance off.
2Remove the lid from the bowl.
3Remove the ingredients with the spatula.
Inserts
The cutting edges of the blades are very sharp
Do not touch them!
1 |
| Do not process hard ingredient, such as ice cubes | |
|
| ||
| 2 | with the inserts! | |
| CLICK C 1 | Put the selected insert into the insert | |
|
|
| holder. |
|
| C 2 | Place the insert holder onto the tool |
|
|
| holder that stands in the bowl. |
3Put the lid on the bowl.
C 4 Put the ingredients in the feed tube. Pre- cut large chunks to make them fit into the feed tube.
ENGLISH 9
5Fill the feed tube evenly for the best results.
When you have to cut large amounts of food, process only small batches at a time and empty the bowl regularly between the batches.
6Select the appropriate speed to obtain optimal results. See the table for the
recommended speed.
Processing takes 10 - 60 seconds.
C |
| Press the ingredients slowly and steadily |
7 | ||
|
| down the feed tube with the pusher. |
C |
| To remove the insert from the insert |
8 | ||
|
holder, take the insert holder in your hands with its bottom pointing towards you. Push the edges of the insert with your thumbs to make the insert fall out of the holder.
Kneading accessory
The kneading accessory can be used for kneading dough for bread and dumplings and for mixing batters and cake mixtures.
|
| C 1 | Fit the kneading accessory onto the tool |
|
|
| holder. |
1 |
|
|
|
| 2 | 2 | Put the ingredients in the bowl. |
|
| ||
CLICK |
| C 3 | Close the bowl with the lid. |
|
|