Manitowoc Ice 11M manual Grounding Instructions, Section, Installation

Page 17
GROUNDING INSTRUCTIONS

Section 2

Installation

 

 

GROUNDING INSTRUCTIONS

!Warning

The beverage/ice machine must be grounded in accordance with national and local electrical codes.

This appliance must be grounded. In the event of malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

NOTE: The 208/230V units are not equipped with a cord.

!Warning

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment grounding conductor. If repair or replacement of the cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal. Check with a qualified electrician or serviceman if the grounding instructions are not completely understood, or if in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance — if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

!Warning

When using electric appliances, basic precautions must always be followed, including the following:

a.Read all the instructions before using the appliance.

b.To reduce the risk of injury, close supervision is necessary when an appliance is used near children.

c.Do not contact moving parts.

d.Only use attachments recommended or sold by the manufacturer.

e.Do not use outdoors.

f.For a cord-connected appliance, the following shall be included:

Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

Unplug from outlet when not in use and before servicing or cleaning.

Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any manner. Contact the nearest authorized service facility for examination, repair, or electrical or mechanical adjustment.

g.For a permanently connected appliance — Turn the power switch to the off position when the appliance is not in use and before servicing or cleaning.

h.For an appliance with a replaceable lamp — Always unplug before replacing the lamp. Replace the bulb with the same type.

i.For a grounded appliance — Connect to a properly grounded outlet only. See Grounding Instructions.

Part Number 020001552 5/11

2-7

Image 17
Contents America’s Quality Choice in Refrigeration Installation, Use & Care ManualModel 11M Root Beer System Refrigeration Unit Procedural Notices Safety NoticesRead These Before Proceeding PERSONAL INJURY POTENTIALSection Installation Table of Contents continued SectionAttention Marine Installations SpecificationsEquipment Placement Table of Contents continuedTower Installation Connecting Insulated ConduitSection Before Calling for Service Table of Contents continued Section MaintenanceBeverage System Cleaning Bag-In-BoxSystem SanitationTHIS PAGE INTENTIONALLY LEFT BLANK Section General Information How to Read a Model NumberSection Read This ManualSpecifications AccessoriesATTENTION MARINE INSTALLATIONS Special ApplicationsSerial Plate Location Warranty InformationTHIS PAGE INTENTIONALLY LEFT BLANK Kit assembly includes Section InstallationGeneral UNPACKING AND INSPECTINGDimensions and Clearances InstallationTop View Side ViewBLADE TOWER REMOTE CONDENSERSafe Installation Dos and Don’ts CLEARANCES Location RequirementsRATINGS REQUIREMENTS FOR POST MIX UNITSSPECIFICATIONS Installer InstructionsElectrical Ambient Location RequirementGROUNDING INSTRUCTIONS PLUMBING POTABLE WATER Plumbing/Water SupplyPLUMBING REQUIREMENTS - GENERAL Drain Hose ConnectionSingle Tower Plumbing PLUMBING CIRCUIT DIAGRAMS - MODEL 11M ROOT BEERModel 11M Root Beer Dual Tower Plumbing 2-10Model 11M Root Beer Three Tower Plumbing 2-11EQUIPMENT PLACEMENT Refrigeration Unit InstallationTOWER INSTALLATION CONNECTING INSULATED CONDUITConnecting conduit at the refrigeration unit CONNECTING SUPPLY LINES2-13 Proceed with the Following TestsConnect the drain Proper John Guest Fitting Installation2-14 PROPER USE OF JOHN GUEST FITTINGSControl Switches 2-15Model 11M Connections Aeroquip Connection Condenser and Pre-chargedLines Installation2-16 INSULATING CONNECTIONSPRE-CHARGEDREFRIGERATION LINE REQUIREMENTS INSTALLING THE MULTIPLEX REMOTE CONDENSER2-17 TESTING CO2 CIRCUIT FOR LEAKS CONNECTING THE PRE-CHARGED REFRIGERATION LINESTESTING SYRUP CIRCUIT 5 GALLON TANKS ONLY 2-18Preparing Ice Bank Start-Up2-19 BUILDING AN ICE BANK2-20 Installation ChecklistObserve the pump operations for leaks Check the water bath for full ice bankOperation Section OperationTypical System Water FiltersSERVICE ACCESS WATER BATH ACCESSHow the Multiplex Works Sequence of OperationEQUIPMENT SETUP PROCEDURE Equipment Setup and Close ProcedureEQUIPMENT CLOSE PROCEDURE Start-upTHIS PAGE INTENTIONALLY LEFT BLANK Maintenance Section MaintenanceBEVERAGE SYSTEM CLEANING SanitizingFIGAL BEVERAGE SYSTEM Shipping, Storage and Relocation Back-flowPreventer MaintenanceTHIS PAGE INTENTIONALLY LEFT BLANK Checklist Section Before Calling for ServiceBefore Calling for Service THIS PAGE INTENTIONALLY LEFT BLANK Before Calling for ServiceSection Page Part Number 020001552 5/11