Rinse aid
Setting the dosage
^Add rinse aid until it is visible on the surface of the filter in the opening.
^Close the flap until it clicks into place. Make sure it is firmly shut, otherwise water could get into the rinse aid reservoir during the program.
^Clean up any spilled rinse aid to prevent
The flap should always remain closed. Only open it to add more rinse aid.
^Only add rinse aid when the rinse aid indicator comes on.
The dosage selector (see arrow) is preset to 3. This dispenses approximately 3 ml of rinse aid per program. It can be adjusted from 1 to 6.
^Use a higher setting if spots appear on dry glassware.
^Use a lower setting if streaking appears on dishes or glasses.
17