Miele 06 868 521, G 7856 Items not suitable for dishwashers, Loading the machine, Please note

Page 19
Items not suitable for dishwashers

Loading the machine

Items not suitable for dishwashers

^Cutlery with wooden or horn handles

^Wooden or plastic cutting boards

^Glued items, e.g. old knives with handles which have been glued on

^Hand-made craft items

^Copper or tin items

^Plastic items which are not heat resistant

Please note

^Silver and aluminum items may slightly discolor.

^Colors painted over a glaze may fade after a number of washes.

^Clouding may occur on glasses after frequent washing.

Our recommendations

^Wash delicate glassware by hand.

^Only wash dishwasher safe glassware, dishes and cutlery.

19

Image 19
Contents Commercial Dishwasher G Operating and Installation Instructionsen - US Page Contents Installation and service IMPORTANT SAFETY INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONS components of the machine Disposal of the old machine AccessoriesSAVE THESE INSTRUCTIONS c Salt reservoir water softener Guide to the machinelocated on the rear side of the machine b Filter combinationa On/Off button I-0 b Door button cDisplay Description of the machine To open the door Opening and closing the doorTo close the door Water softener Setting the water softenerWater Softener factory setting Table of settingsFilling the salt reservoir Salt indicator Adding rinse aid Rinse aidSetting the dosage Loading the machine Loading the machinePlease note Items not suitable for dishwashersOur recommendations Loading examples Upper basketBottom basket CutleryTo adjust the upper basket Adjusting the upper basketAdding cleaning agent Rapid program Maintenance of the dispensing systemsEvery 12-18months Starting a program Turning onTurning off Selecting an additional functionProgram sequence display At the end of a programChanging a program Canceling a programProgram cycle Program guideWhen to use ProgramNORMAL 2. Selecting a second interim rinse Programming special functionsVenting the dispensing system Having changed a value or all values Setting the dosageTemperature holding time Main wash Having changed a value or all values Temperature holding time Final rinseb Setting the delay start period 6.Delay start and setting the delay start timea To activate Delay Start 7. Buzzer Turn the program selector to STOP Filter combination Machine careCleaning the spray arms Cleaning the non-returnvalve and drain pump To clean the filters Cleaning the filters in the water inletCleaning the control panel Cleaning the front of the machineFaults / possible causes Correcting minor faultsRemove the cause of the fault After Sales Service Page Installation Instructions Disposal of the packing material Caring for the environmentDisposal of the appliance Installation options -Free-standing -Undercounter InstallationOpen the door Cover plate protects the countertop Leveling the machinePosition and secure the machine Stainless steel toe kickTHIS APPLIANCE MUST BE GROUNDED Electrical connectionPLEASE NOTE Isolate the machine from the power supply Connection to the water inlet PlumbingDrainage English Technical dataMetric Page Page M.-Nr.06 All rights reserved