Miele G 7856 Upper basket, Bottom basket, Cutlery, Loading examples, Loading the machine

Page 20
Upper basket

Loading the machine

Upper basket

^Ideal for small, lightweight, delicate items such as cups, saucers, glasses, dessert bowls, etc. as well as lightweight heat resistant plastic items.

Bottom basket

^Ideal for larger and heavier items such as plates, serving platters, saucepans, bowls, etc. Glasses may only be cleaned in the bottom basket if it is fitted with a special glassware insert or if there is a special bottom basket.

Cutlery

^Unsorted cutlery should be placed in the cutlery holders with the handles facing downwards.

Select baskets and inserts which are appropriate for the application.

Loading examples

O 881 Upper basket:

for 20 cups, 24 saucers or 12 dessert plates

U 880 Bottom basket:

with 2 x E 216 half inserts each for 15 plates Ø 9 ½" (240 mm) and

2 x E 165 cutlery baskets for mixed cutlery

20

Image 20
Contents en - US Operating and Installation InstructionsCommercial Dishwasher G Page Contents IMPORTANT SAFETY INSTRUCTIONS Installation and serviceIMPORTANT SAFETY INSTRUCTIONS components of the machine SAVE THESE INSTRUCTIONS AccessoriesDisposal of the old machine Guide to the machine located on the rear side of the machineb Filter combination c Salt reservoir water softenera On/Off button I-0 b Door button cDisplay Description of the machine To close the door Opening and closing the doorTo open the door Water Softener Setting the water softenerWater softener Table of settings factory settingFilling the salt reservoir Salt indicator Rinse aid Adding rinse aidSetting the dosage Loading the machine Loading the machineOur recommendations Items not suitable for dishwashersPlease note Upper basket Bottom basketCutlery Loading examplesAdjusting the upper basket To adjust the upper basketAdding cleaning agent Every 12-18months Maintenance of the dispensing systemsRapid program Turning on Starting a programSelecting an additional function Program sequence displayAt the end of a program Turning offCanceling a program Changing a programProgram guide When to useProgram Program cycleNORMAL Programming special functions 2. Selecting a second interim rinseVenting the dispensing system Setting the dosage Having changed a value or all valuesTemperature holding time Main wash Temperature holding time Final rinse Having changed a value or all valuesa To activate Delay Start 6.Delay start and setting the delay start timeb Setting the delay start period 7. Buzzer Programming special functions Machine care Filter combinationCleaning the spray arms Cleaning the non-returnvalve and drain pump Cleaning the filters in the water inlet Cleaning the control panelCleaning the front of the machine To clean the filtersCorrecting minor faults Faults / possible causesRemove the cause of the fault After Sales Service Page Installation Instructions Disposal of the appliance Caring for the environmentDisposal of the packing material Open the door InstallationInstallation options -Free-standing -Undercounter Leveling the machine Position and secure the machineStainless steel toe kick Cover plate protects the countertopPLEASE NOTE Electrical connectionTHIS APPLIANCE MUST BE GROUNDED Isolate the machine from the power supply Plumbing Connection to the water inletDrainage Metric Technical dataEnglish Page Page All rights reserved M.-Nr.06