Miele 06 868 521, G 7856 installation instructions Important Safety Instructions

Page 5
Manual background

IMPORTANT SAFETY INSTRUCTIONS

~If the power cord is damaged it must only be replaced by a Miele Service technician with a genuine Miele power cord.

~Do not use an extension cord to connect this machine to electricity. Extension cords do not guarantee the required safety of the machine (e.g. danger of overheating).

~Defective components should be replaced by Miele original parts only. Only with these parts does the manufacturer guarantee that they comply with safety requirements.

~Before installation or service,

disconnect the power supply to the work area by unplugging the unit, "tripping" the circuit breaker or removing the fuse.

~When work has been performed on the supply plumbing, the supply line to the commercial dishwasher must be bled.

Otherwise, the water softening system may be damaged.

Use

~Please follow the advice on installation in this manual and in the separate Installation Instructions.

~Personnel operating the machine should be trained regularly.

~Persons who lack physical, sensory or mental abilities, or experience with the machine should not use it without supervision or instruction by a responsible person.

~Do not allow children to play in or around the dishwasher, or to operate it.

~Do not tamper with the controls.

~BURN AND SCALD HAZARD

This dishwasher reaches very high temperatures. Take care when unloading the unit. Let baskets and inserts cool before touching them. Any water which may remain in containers will be very hot and should be emptied into the wash cabinet.

~BURN HAZARD

The heating elements become extremely hot during use. Do not touch the heating elements during or directly after the end of a program.

~Take care when handling liquids such as detergent, rinsing, wetting, or neutralizing agents. These may contain irritant or caustic ingredients. Do not use any organic solvents. Danger of explosion!

Follow the instructions and relevant safety procedures carefully. Wear protective gloves and goggles. The manufacturer’s safety conditions must be observed with all chemical agents.

5

Image 5
Contents en - US Operating and Installation InstructionsCommercial Dishwasher G Page Contents Installation and service IMPORTANT SAFETY INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONS components of the machine SAVE THESE INSTRUCTIONS AccessoriesDisposal of the old machine located on the rear side of the machine Guide to the machineb Filter combination c Salt reservoir water softenera On/Off button I-0 b Door button cDisplay Description of the machine To close the door Opening and closing the doorTo open the door Water Softener Setting the water softenerWater softener factory setting Table of settingsFilling the salt reservoir Salt indicator Adding rinse aid Rinse aidSetting the dosage Loading the machine Loading the machineOur recommendations Items not suitable for dishwashersPlease note Bottom basket Upper basketCutlery Loading examplesTo adjust the upper basket Adjusting the upper basketAdding cleaning agent Every 12-18months Maintenance of the dispensing systemsRapid program Starting a program Turning onProgram sequence display Selecting an additional functionAt the end of a program Turning offChanging a program Canceling a programWhen to use Program guideProgram Program cycleNORMAL 2. Selecting a second interim rinse Programming special functionsVenting the dispensing system Having changed a value or all values Setting the dosageTemperature holding time Main wash Having changed a value or all values Temperature holding time Final rinsea To activate Delay Start 6.Delay start and setting the delay start timeb Setting the delay start period 7. Buzzer Turn the program selector to STOP Filter combination Machine careCleaning the spray arms Cleaning the non-returnvalve and drain pump Cleaning the control panel Cleaning the filters in the water inletCleaning the front of the machine To clean the filtersFaults / possible causes Correcting minor faultsRemove the cause of the fault After Sales Service Page Installation Instructions Disposal of the appliance Caring for the environmentDisposal of the packing material Open the door InstallationInstallation options -Free-standing -Undercounter Position and secure the machine Leveling the machineStainless steel toe kick Cover plate protects the countertopPLEASE NOTE Electrical connectionTHIS APPLIANCE MUST BE GROUNDED Isolate the machine from the power supply Connection to the water inlet PlumbingDrainage Metric Technical dataEnglish Page Page M.-Nr.06 All rights reserved