Loading the machine
Loading the machine
Preparation
^Empty all containers before loading them into the machine.
,Ensure that no acid or solvent residues, especially hydrochloric acid or chlorides get into the wash cabinet.
Notes
^Load items so that water will come into contact with all surfaces. This ensures that they will be properly cleaned.
^Do not place items to be cleaned inside other pieces where they may be concealed.
^Hollow vessels such as cups, glasses, pots, etc. should be inverted and placed in the correct inserts.
^Deep based items should be placed at an angle to ensure that water runs off them freely.
^Tall, narrow, hollow pieces should be placed in the center of the basket to ensure good water coverage.
^Small pieces should be placed on the cup racks in the upper basket. Do not obscure them by larger items below. Cups should be on the lower rack and bowls on the top rack so that water reaches all pieces.
^The spray arms must not be blocked by items which are too tall or which hang down in their path. Check if they rotate freely.
^Do not place tall items in the front right area of the lower basket. They could prevent the detergent compartment flap from opening.
18