Electrical connection
,All electrical work must be carried out by a suitably qualified person in compliance with local and national safety regulations.
A damaged power cord must only be replaced with a genuine Miele cord by a Miele Service Technician.
^For technical data see the data plate or wiring diagram supplied.
The machine must only be operated with the voltage, frequency and fusing shown on the data plate.
The data plate is located on the rear of the machine and behind the service panel on the upper left side.
The dishwasher can be converted according to the supplied converting diagram and wiring diagram.
The wiring diagram is located behind the operating panel.
The conversion diagram is located behind the service panel.
^See also the supplied installation diagram.
WARNING
THIS APPLIANCE MUST BE GROUNDED
Grounding the machine
A connection screw with the grounding symbol (8) is provided on the back of the machine for grounding.
PLEASE NOTE:
The G 7856 is available as two separate versions:
a 240V version,
a 208V version.
To avoid machine damage, please ensure proper outlet voltage prior to installation.
49